nakhonthai/ESP32APRS_Audio
nakhonthai/ESP32APRS_Audio has 291 GitHub stars and 75 forks. GitHot measured 0 stars in 24 hours. Last checked 2026-11-19 07:21 UTC. Last push 2026-07-11.
Measured star growth
- in 24h
- 0
- in 7 days
- Collecting history
- in 15 days
- Collecting history
- in 1 month
- Collecting history
Net star changes over overlapping periods, not daily totals. Missing measurements are left blank. Stars measure attention, not software quality.
About
ESP32APRS Audio is a APRS support AFSK modem that is implemented for Espressif ESP32 processor.
Creative & MediaREADME.md
OriginalArduino core for the ESP32, ESP32-C3, ESP32-C6 and ESP32-S3
ESP32APRS Audio(Speaker/Mic) Project
ESP32APRS Audio is a Internet Gateway(IGate)/Digital Repeater(DiGi)/Tracker/Weather(WX)/Telemetry(TLM) with AFSK/GFSK TNC Built in that is implemented for Espressif ESP32 processor.
Feature
- Supported hardware: ESP32DR Simple,ESP32DR,D.I.Y Other
- Supported RF Module: SA8x8/FRS VHF/UHF/350 model
- Support APRS internet gateway (IGATE)
- Support APRS digital repeater (DIGI)
- Support APRS tracker (TRACKER)
- Support APRS Weather (WX)
- Support APRS telemetry (TLM)
- Support APRS Message (MSG)
- Support GNSS External mod select UART0-2 and TCP Client
- Support TNC External mod select UART0-2 and Yaesu packet
- Support APRS IGATE/DIGI/WX/Telemetry with fix position for move position from GNSS
- Using ESP-Arduino development on Visual studio code + Platform IO
- Implementing software modem, decoding and encoding
- Support monitor display information and statistices
- Support Wi-Fi multi station or WiFi Access point
- support Web Service config and control system
- support filter packet rx/tx on igate,digi,display
- support audio filter BPF,HPF
- support VPN wireguard
- support global time zone
- support web service auth login
- support BLUETOOTH SPP/BLE
- support PPPoS (PPP Over Serial GSM network)
- support MQTT
- support AT-Command config/ctl by channel UART,MSG,Bluetooth
- support Automatic REBOOT by interval time
- display received and transmit packet on the LED and display OLED or led color strip
- Multiple modems: credit coding from project vp-digi
- 1200bps AFSK Bell 202 1200/2200Hz (VHF standard)
- 300bps AFSK Bell 103 1600/1800Hz (HF standard)
- 9600bps GFSK G3RUH (For ESP32-S3)
- 1200bps AFSK V.23
- Analog-digital busy channel detection (data carrier detection)
- AX.25 coder/decoder
- FX.25 (AX.25 with error correction) coder/decoder, fully compatible with Direwolf and UZ7HO Soundmodem
Hardware screen short

Hardware mod
Web service screen short

ESP32DR_SA868
Share project here
Schematic here
PCB Gerber hare
ESP32DR Simple

ESP32DR Simple Circut is small interface board for connecting to a transceiver.
- PCB size is 64x58mm
- PCB Single size
- RJ11 6 Pin out to Radio
Fix Audio input/output port
| ESP32 Core | ADC(Speaker) | DAC(Mic) |
|---|---|---|
| ESP32 | GPIO36 | GPIO26 |
| ESP32-C3 | GPIO0 | GPIO1 |
| ESP32-S3 | GPIO1 | GPIO2 |
Schematic
CAD data
The gerber data is here
The PCB film positive is here
The PCB film negative is here
The PCB Layout is here
The ESP32DR_Simple Schematic PDF is here
The ESP32C3APRS Schematic PDF is here
BOM list
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32 DEVKIT | DOIT ESP32 DEVKIT (โมดูล ESP32) |
| RP2 | 1K | VR 3362W (R ปรับค่าเสียงออก) |
| RP1 | 10K | VR 3362W (R ปรับค่าเสียงเข้า) |
| RJ11 | RJ11-6P6C | แจ๊คโมดูล RJ11 แบบ 6ขา |
| R13,R12,R11,R5,R3,R9 | 1K | R 1K 1/4W (ค่าสี: น้ำตาล ดำ แดง) |
| R7,R18,R19 | 100R | R 100R 1/4W (ค่าสี: น้ำตาล ดำ ดำ) |
| R6,R2,R1 | 10K | R 10k 1/4W (ค่าสี: น้ำตาล ดำ ส้ม) |
| R4 | 3K | R 3k 1/4W (ค่าสี: ส้ม ดำ แดง) |
| R10 | 33K | R 33K 1/4W (ค่าสี: ส้ม ส้ม ส้ม) |
| Q1 | 2N3904 | ทรานซิสเตอร์ NPN (TO-92) |
| LED3 | LED 3.5mm | สีเหลือง แสดงส่งสัญญาณ TX |
| LED2 | LED 3.5mm | สีเขียว แสดงรับสัญญาณ RX |
| LED1 | LED 3.5mm | สีแดง แสดงไฟเข้าทำงาน |
| L1 | L or JMP | L Isolate or Jumper |
| C11 | 100uF/6.3V | ตัวเก็บประจุแบบอิเล็กโทรไลติก |
| C4,C5 | 100nF | ตัวเก็บประจุแบบเซรามิกมัลติเลเยอร์ |
| C6 | 470uF/10V | ตัวเก็บประจุแบบอิเล็กโทรไลติก |
| C1,C3,C10 | 100nF หรือ 0.1uF | ตัวเก็บประจุแบบโพลีโพรไพลีน |
| C2 | 10nF หรือ 0.01uF | ตัวเก็บประจุแบบโพลีโพรไพลีน |
| D2,D1 | 1N4148 | ไดโอด หรือใช้ C 0.01uF แทนได้ |
*R18 and R19 ไม่ใส่ก็ได้.
*D2,D1 เปลี่ยนเป็นตัวเก็บประจุแบบเซรามิกมัลติเลเยอร์ค่า 10nF แทนได้
*หากใช้ต่อกับวิทยุรับส่งเข้าขาไมค์นอก ให้เปลี่ยน R4 เป็น 100K
จัดซื้อชุดคิทผ่าน Shopee ได้ที่ คลิ๊ก
The Howto DIY is here
Mounting drawing

Transceiver connection
Solder jumper is needed depending on a transceiver.

| Manufacture | RJ11-1 (+VIN) | RJ11-2 (SPK) | RJ11-3 (PTT) | RJ11-4 (GND) | RJ11-5 (MIC) | RJ11-6 (SQL) |
|---|---|---|---|---|---|---|
| Alinco DR-135(DB9) | - | 2 | 7 | 5 | 9 | 1 |
| IC2200(RJ45) | - | SP | 4 | 5 | 6 | - |
| FT-2800(RJ11) | - | SP | 1 | 3 | 2 | - |
| HT Mic Cable | - | SPK | PTT | GND | MIC | - |
for Alinco DR-135(DB9)

for ICOM IC2200(RJ45)

for Yaesu FT-2800(RJ11)

for Handheld


ESP32APRS_Audio firmware installation (do it first time, next time via the web browser)
- 1.Connect the USB cable to the ESP32 Module.
- 2.Download firmware and open the program ESP32 DOWNLOAD TOOL, set it in the firmware upload program, set the firmware to ESP32_Vxx.bin, location 0x10000 and partitions.bin at 0x8000 and bootloader.bin at 0x1000 and boot.bin at 0xe000, if not loaded, connect GPIO0 cable to GND, press START button finished, press power button or reset (red) again.
- 3.Then go to WiFi AP SSID: ESP32APRS_Audio and open a browser to the website. http://192.168.4.1 password: aprsthnetwork Can be fixed Or turn on your Wi-Fi router.
- 4.Push BOOT button long >100ms to TX Position and >10Sec to Factory Default

ESP32 Flash Download Tools
https://www.espressif.com/en/support/download/other-tools
PlatformIO Quick Start
- Install Visual Studio Code and Python
- Search for the
PlatformIOplugin in theVisualStudioCodeextension and install it. - After the installation is complete, you need to restart
VisualStudioCode - After restarting
VisualStudioCode, selectFilein the upper left corner ofVisualStudioCode->Open Folder-> select theESP32APRSdirectory - Click on the
platformio.inifile, and in theplatformiocolumn, cancel the sample line that needs to be used, please make sure that only one line is valid - Click the (✔) symbol in the lower left corner to compile
- Connect the board to the computer USB
- Click (→) to upload firmware and reboot again
- After reboot display monitor and reconfig
APRS Server service
- APRS SERVER of T2THAI at aprs.dprns.com:14580, CBAPRS at aprs.dprns.com:24580
- APRS SERVER of T2THAI ampr host at aprs.hs5tqa.ampr.org:14580
- APRS MAP SERVICE http://aprs.dprns.com
Developer/Support Information
- Author: Mr.Somkiat Nakhonthai
- Callsign: HS5TQA,Atten,Nakhonthai
- Country: Bangkok,Thailand
- Github: https://github.com/nakhonthai
- Youtube: https://www.youtube.com/@HS5TQA
- TikTok: https://www.tiktok.com/@hs5tqa
- Facebook: https://www.facebook.com/atten
- Telegram: https://t.me/APRSTH
- TelegramID: @HS5TQA
- WeChatID: HS5TQA
Donate
To support the development of ESP32APRS you can make us a donation using github sponsors.
If you want to donate some hardware to facilitate APRS porting and development, contact us.
ESP32 Flash Download Tools
https://www.espressif.com/en/support/download/other-tools
Credits & Reference
- ESP32TNC project by amedes ESP32TNC
- APRS Library by markqvist LibAPRS
- vp-digi project by sq8vps vp-digi
HITH
This project implement by APRS text (TNC2 Raw) only,It not support null string(0x00) in the package.

