Skip to content
Projects

irarainey/silverdaw has 47 GitHub stars and 6 forks. GitHot measured 0 stars in 24 hours. Last checked 2026-11-15 16:47 UTC. Last push 2026-11-06.

How these counts are measured

What you can do

  • Timeline range playback. Drag the ruler away from the playhead to select a section snapped to the timeline grid, to play once or repeat with Loop Selection (L). The range and loop mode are saved with the project, the range keeps its place in the bars if you change the project tempo, and pressing Escape clears them.
  • Crossfade transitions. Extend a clip edge over an adjacent clip to create a crossfade. Use the clip menu's Crossfade group to choose a Smooth or Fade out/in recipe, or remove it.
  • Line up a beat grid by hand. If the markers sit slightly off the beat, open a clip in the Clip Editor and slide its grid over the waveform. The clip stays exactly where you put it and the audio moves under the markers. This phase is each clip's own, so nudging one never disturbs another cut from the same file.
  • Metronome. Toggle an audible click that follows the project tempo from the timing display, so you can check by ear whether a loop or beat sits in time with the BPM. It is off by default and its state is saved with the project.

Measured star growth

in 24h
0
in 7 days
Update delayed
in 15 days
Update delayed
in 1 month
Update delayed

Net star changes over overlapping periods, not daily totals. Missing measurements are left blank. Stars measure attention, not software quality.

About

An open-source Windows Digital Audio Workstation (DAW) for remixing, mashups, and sample-driven music making.

Creative & Media

README.md

Original
Silverdaw logo

Silverdaw

An open-source Digital Audio Workstation (DAW) for remixing, mashups, and sample-driven music making.

Current release: 1.10.0 — see the changelog.

What is Silverdaw?

Silverdaw is a Windows desktop application for building tracks out of existing audio. Import your songs, loops, vocals, and samples, drag them onto a timeline, and arrange, trim, re-pitch, and tempo-match them into a finished mix. It is designed for bedroom DJs, producers, and mixers — anyone who wants to create mixes and mashups easily by combining and reshaping existing audio. It is geared towards DJs and producers as a studio creation tool, not a live-performance instrument. You can also record your own audio — a vocal, an instrument, or a line input — over the arrangement as it plays, and use the take like any other clip. Supported MIDI DJ decks can also record editable vinyl-style scratches directly from audio into a mix, combining deck control with a non-destructive studio workflow.

Installation

Silverdaw runs on Windows 10 (1809+) or Windows 11 (64-bit). There are two ways to install it — see the installation guide for full steps and the pros and cons of each:

  • Microsoft Store (recommended) — one-click install, no setup, automatic updates.
  • Portable download — a zip you unzip and run; no installation.

Goals and focus

Silverdaw is built around a single idea: arranging audio should be simple.

  • Approachable by design. The app stays deliberately small and focused. Common tasks are a drag, a double-click, or a single menu item away — no deep menus or studio jargon to learn first.
  • Remix and mashup first. Everything is geared towards layering and blending existing audio: automatic tempo and key detection, tempo matching, pitch shifting, and a per-project library of clips and samples.
  • Non-destructive. Tempo, pitch, and trim changes are applied as settings on a clip, so your original files are never altered and edits can always be undone or revised.
  • It just plays. Drop a clip in and it is ready to play. Analysis and waveforms happen in the background and never block what you are doing.

Key features

  • Project library. Drop audio files onto the Library to import them, or use the Import button and File ▸ Import to Library…. File ▸ Import from Project… copies selected stems and samples from another saved project in your configured project folder. Importing a scratch sample also brings its editable notation and original source audio. You can also drop a file directly onto a timeline track to import and place it, or onto empty timeline space to create a track for it. Dropping several files creates one new track per file. Filter the Library by track name, artist, or BPM with the field beside Import; use its X or press Escape while it is focused to clear it. Library items are grouped and easy to reuse. Tiles show a track's cover art (or a per-kind icon when there's none); right-click a tile to Update Image… with your own picture, or Remove / Restore the image — all per-tile and non-destructive.

  • File browser. The Files tab beside the Library browses folders of audio on your own drives, showing each track's cover art, title, artist, album, type and length. Listen to a file through your audio output device before deciding, then import it with one click. Drag a file straight onto a track to import it and place it in one go, or drop it below the last track to get a new track for it. Add folders with the button on the left — that pick is the only thing that lets Silverdaw read them — and they are remembered the next time you open the app. Filter by track name or artist, and drive the whole list from the keyboard.

  • Record audio. Press record in the transport to capture a vocal, an instrument, or anything else through your microphone or line input while the arrangement plays under you. Record from the start of the project, from the playhead, or over a selected range — with an optional count-in and click, and a live waveform of the take as it goes down. Choose which tracks you hear underneath and how loud they sit, and turn on Hear Yourself to monitor your input on headphones alongside them. Keep the take as Music, so it picks up the project tempo and warps like any other clip, or Simple for speech and sound effects, with an optional clean-up of low-level background noise. Play the result back on its own or against the arrangement, re-record it until it's right, then add it to the library or drop it straight onto the timeline where you played it. A stereo take can be split into its two channels on the way in, so a two-channel mixer works as the input device and its two sources land on separate tracks. Recordings are ordinary library items, so everything else here works on them.

  • Timeline arranging. Move, split, duplicate, cut, copy, paste, trim, colour, and delete clips across multiple tracks. Drag clips or nudge them with the keyboard; clips snap to the beat grid by default, with a modifier for fine, free placement. A grid control in the status bar sets how coarse that grid is — bar, beat, half beat or quarter beat — or turns snapping off entirely, and it is saved with the project. Select several clips at once — Shift-click a range on one track or Ctrl-click clips across tracks — then move the whole group together, nudge it with the arrow keys, or lock, colour, duplicate, delete, and cut/copy/paste them in one step. Bar numbering starts at 1 by default, or you can start it at 0 or lower to leave lead-in bars before bar one for clips with a silent intro.

  • Timeline range playback. Drag the ruler away from the playhead to select a section snapped to the timeline grid, to play once or repeat with Loop Selection (L). The range and loop mode are saved with the project, the range keeps its place in the bars if you change the project tempo, and pressing Escape clears them.

  • Markers. Press M to drop a marker at the playhead — exactly where it sits, not nudged to the nearest beat — and M again on it to remove it. Jump between markers with Ctrl+←/→, drag one along the ruler to move it (hold Alt for free placement), or clear the lot with Edit ▸ Clear All Markers. Markers are saved with the project and keep their place in the bars if you change the project tempo.

  • Crossfade transitions. Extend a clip edge over an adjacent clip to create a crossfade. Use the clip menu's Crossfade group to choose a Smooth or Fade out/in recipe, or remove it.

  • Automatic analysis. Imported audio is analysed for key, tempo (BPM), and beat positions, so clips can line up musically. Once a clip's tempo is known it automatically snaps to the timeline's bar grid so its bars line up with the project — handy when a clip has a silent intro — and you can turn this off in Preferences. Two independent detectors are used: when the first is unsure of a tempo, a second settles it, and anything still doubtful is marked tempo unverified so you know to check it.

  • Correct a wrong tempo. When a detected BPM is wrong, Edit BPM sets the right one and respaces that file's beat markers to match. Nothing in your arrangement moves: every clip, marker, and automation point stays exactly where you put it, and stems and saved clips taken from the same file are corrected along with it. It is one undo away, and it tells you which clips it re-warped and which it left alone. Find it on a library item's right-click menu, on the Edit button beside the BPM on a clip's or library item's information, or in the Clip Editor. The project tempo is separate and is never changed for you — that number stays yours, in the transport bar.

  • Line up a beat grid by hand. If the markers sit slightly off the beat, open a clip in the Clip Editor and slide its grid over the waveform. The clip stays exactly where you put it and the audio moves under the markers. This phase is each clip's own, so nudging one never disturbs another cut from the same file.

  • Metronome. Toggle an audible click that follows the project tempo from the timing display, so you can check by ear whether a loop or beat sits in time with the BPM. It is off by default and its state is saved with the project.

  • Stem separation. Split a track into vocals, drums, bass, and other parts and drop each onto its own track to remix and recombine — non-destructive, with optional GPU acceleration. Each stem keeps the original's tempo, key, and artwork. High-quality RoFormer models (downloaded once, ~1 GB) do the separation by default, with a backup model downloaded automatically only if it's ever needed. A Fast / Balanced / Best speed control and optional one-click cleanup let you trade speed for polish, and an optional per-run reverb & echo removal cleans room reverb and slap-back off the vocal as it separates.

  • Split stereo channels. Use Transform ▸ Split Stereo Channels… on a stereo clip to split its Left and/or Right channel onto its own new track — each channel becomes a stereo clip carrying only that side (copied to both). Non-destructive, and each split keeps the original's tempo, key, and artwork, just like a stem.

  • Tempo and pitch. Clips can automatically match the project tempo and be pitch-shifted independently, all without changing the source file.

  • Saved clips and samples. Save reusable clips to the library and bake any clip down to a fresh sample when you want to commit its current sound.

  • Loop slicing. Chop a clip into slices — on a bar or beat grid (from a whole bar down to 1/32) or with hand-placed markers — then lay the slices back on the timeline as separate clips, or save each one as its own sample to rearrange and rebuild. Use Transform ▸ Chop to Grid for a quick grid chop, or open the Clip Editor's Slice mode for hands-on control. Non-destructive — the source file is untouched.

  • Beat Repeat. Use Effects ▸ Beat Repeat on a clip or empty track lane to add a tempo-aligned repeat region at the playhead. Choose a duration and a 1/4, 1/8, or 1/16 division to capture and repeat part of the track without changing its source audio.

  • Portable projects. Saving a project nests it in its own folder and keeps its generated stems, samples, and recordings beside the project file, so the whole folder can be moved or synced between machines (for example via cloud storage) and still open — as long as the original source files sit at the same location.

  • Tidy up on remove. Optionally have Silverdaw delete a stem's, sample's, or recording's generated file — and the now-empty folder it leaves behind — from disk when you remove it from the library. Off by default (removal just unlinks it from the project); your original imported files are never touched. This can't be undone. Turn it on in Preferences ▸ Project.

  • Track, project, and master controls. Per-track volume faders with a bipolar equal-power Pan control in each track header, plus mute, solo, and a collapsible bottom panel with Files, Library, Track FX, Plugins, and Project FX tabs.

    • Track FX
      • Tone: Bass, Mid, and Treble controls.
      • Filter: a single DJ-style sweep from low-pass through off to high-pass.
      • Compressor: single-knob gentle dynamics control.
      • Punch: clean transient lift.
      • Saturation: warmth at lower Drive settings, with stronger grit near the top.
      • Bit Crusher: lo-fi digital reduction.
      • Reverb and Delay sends: feed the shared Project FX effects.
    • Project FX
      • Reverb and Delay: song-wide effects fed by each track's sends. Delay Time uses direct 1/4, 1/8, 1/8T, and 1/16 beat-division buttons.
      • Glue Compressor: one-control compression after the shared effect returns and before master gain, with automatic makeup capped at 3 dB.
      • Safety Limiter: enabled-by-default fixed -1 dBFS protection for the final output.
    • FX layout and guidance: each Track FX and Project FX header offers a hover explanation. Track FX keeps five responsive columns: Tone; Filter above Reverb & Delay; Compressor above Punch; Saturation; and Bit Crusher.
    • Drag to resize and reorder tracks, and use the master output's live metering.
  • VST3 effect plugins. Add your own installed VST3 effects that process stereo audio to any track from the Plugins tab, on top of the built-in Track FX. Build up a chain, reorder it, bypass any plugin, and open a plugin in its own editor window to dial it in. Silverdaw finds your plugins with a scan that runs outside the app, so a plugin that fails to load can't take Silverdaw down with it. Your projects remember which plugins they use and how each one is set, and export exactly the chain you hear. Plugins that work ahead, like linear-phase EQs and lookahead limiters, stay in time with the rest of the mix. Open a project on a machine that's missing a plugin and the slot is kept, greyed out, with its settings intact until you install it.

    Not supported: other plugin formats (VST2, CLAP, AU), instruments, and effects that need MIDI notes or a side-chain feed — so vocoders, MIDI-triggered gates and side-chain compressors won't work as intended. A plugin's own description can't always be trusted here, so Silverdaw checks after loading and tells you when a plugin wants something it can't be given.

  • Track effect automation. Open a collapsible automation stack under any track, then add distinct parameter lanes to view and edit several breakpoint curves together. Lanes cover Filter, Pan, Tone Bass / Mid / Treble, Reverb / Delay sends, Compressor, Punch, Saturation, Bit Crusher, and Gain (a post-FX track level). Each lane has its own parameter picker and height, and the open lanes persist with the project. Add, drag, right-click or Alt-click to delete, and arrow-key nudge points; raise/lower or copy/paste a whole curve. Pasting between effects maps values into the target range so the curve keeps its shape. Values play live and render identically in the mixdown. Each Track FX control has an A button to automate it: the slider sets the resting value, and a drawn curve overlays it over time — and while a curve is active its slider follows the automation, so you can watch each control move as the track plays.

  • Per-clip volume shaping. Draw a volume envelope right on a clip's waveform in the Clip Editor to swell, duck, fade in, or fade out, or chop a selected range to silence or full volume with hard edges — all non-destructive and applied to both playback and export.

  • Reverse a clip. Play any clip back-to-front from Effects ▸ Reverse or a toggle in the Clip Editor (with live preview) — non-destructive, so the source file is never altered.

  • DJ turntable effects. Add one of these at the end of a clip from Effects ▸ Brake / Backspin or the Clip Editor toolbar:

    • Brake: a vinyl record-stop that slows the clip to a halt.
    • Backspin: a reverse rewind, like pulling the record back.

    Both have live preview, are non-destructive, apply to every linked copy, work on warped clips, and carry through to export. Reverse, Brake, and Backspin are mutually exclusive — set one and the others stay visible but disabled until you turn it off. Tune how long Brake and Backspin take and how they feel in Preferences ▸ Effects.

  • Vinyl-style scratch authoring. Open a clip or library item in the Scratch Editor and use a supported MIDI DJ deck to record platter and crossfader moves. Deck control is the primary workflow; the on-screen deck offers an experimental trackpad and keyboard fallback for creating a simple scratch that you can edit into a more complex pattern. Replay the result, apply it non-destructively to a clip, or save it as a new library sample for use in your mix. Scratch realism adds adjustable held-platter softening and groove texture, with Off, Medium, and High levels in Preferences ▸ Effects.

  • Single or stereo waveforms. Choose whether clips show one combined waveform or stacked left / right channels (the default), in Preferences — applied everywhere a waveform is drawn: the timeline, the Clip Editor, the Scratch Editor, and the Record Audio dialog.

  • Per-project sample rate. Pin a project to 44.1 or 48 kHz; imports are checked against the project rate and offer a clear path when they differ.

  • Mixdown export. Render the whole project to a single stereo file in WAV, FLAC, AIFF, or MP3, with optional loudness normalisation and a choice of which bar to start the render from.

  • Autosave and crash recovery. Work is snapshotted in the background and offered back to you after an unexpected exit.

  • Stay in flow. Drop files onto the Library, or import them from File ▸ Import to Library… (Ctrl+I), toggle the bottom panel with Ctrl+J, jump to zoom presets with Ctrl+1–8, and navigate with Home / End. Choose any audio output device and hot-swap it without leaving the timeline, relink moved source files in one step, and undo or redo any edit. Help ▸ Keyboard Shortcuts opens the full shortcut reference.

  • Supported MIDI deck control. Use a recognised deck controller for transport, timeline and marker navigation, clip browsing, selected-track mixer controls, platter holding and scratching, plus supported lights and meters. Other MIDI devices remain visible but cannot be enabled. See the supported controller list and control reference.

Supported audio

  • Import: WAV, AIFF, FLAC, MP3, AAC / M4A / MP4, and Windows Media audio.
  • Export: WAV, FLAC, AIFF, and MP3.
  • Processing & quality: Audio is processed internally in 32-bit floating point from end to end, so your imported files — whatever their original bit depth — are never quantised while you edit or play, and the source files are never altered. Conversion to a final bit depth happens only on export, which defaults to 16-bit and also offers 24-bit and 32-bit float depending on the chosen format (WAV: 16 / 24 / 32-float; FLAC and AIFF: 16 / 24).

Stem separation models

Silverdaw's stem separation is powered by open, machine-learning models. To keep the download small, no models ship inside the app — they are fetched only when you first use stem separation, downloaded once, and then stored on your computer and reused for every future separation.

For full transparency about what Silverdaw downloads and from where: the models are hosted on Silverdaw's own Hugging Face account and are downloaded directly from there:

By default Silverdaw uses the higher-quality RoFormer models (vocals and drums/bass, ~1 GB total), with a smaller backup model downloaded automatically only if it's ever needed as a fallback. Nothing is uploaded — separation runs entirely on your own machine, and the download is a one-time, on-demand fetch of the model files only. If you would rather not download anything, you can point Silverdaw at a copy of the models you already have from Preferences ▸ Stems.

Documentation

  • Installation guide — how to install Silverdaw (Microsoft Store or portable zip) with the pros and cons of each.
  • Developer Guide — architecture, internals, build and run instructions, and contributor workflows.
  • MIDI deck controllers — supported devices, setup, mapped controls, feedback, limitations, and troubleshooting.

License

Silverdaw is released under the GNU Affero General Public License v3.0 or later — see LICENSE for the full text. Third-party components retain their own licences; see THIRD_PARTY_LICENSES.md for the required attribution notices.