Skip to content
Projects

espressif/esp-iot-bridge has 241 GitHub stars and 89 forks. GitHot measured 0 stars in 24 hours. Last checked 2026-11-18 03:34 UTC. Last push 2026-11-09.

How these counts are measured

Measured star growth

in 24h
0
in 7 days
Collecting history
in 15 days
Collecting history
in 1 month
Collecting history

Net star changes over overlapping periods, not daily totals. Missing measurements are left blank. Stars measure attention, not software quality.

About

A smart bridge to make both ESP and the other MCU or smart device can access the Internet.

Developer Tools

README.md

Original

ESP-IoT-Bridge Solution

The ESP-IoT-Bridge solution framework is a complete project directory structure framework based on the IoT-Bridge components, which can be used by developers for reference.

The ESP-IoT-Bridge solution connects network interfaces used in IoT applications, including SPI, SDIO, USB, Wi-Fi, and Ethernet. It can be combined with other solutions, such as Wi-Fi Mesh Lite and Rainmaker. Typical uses include wireless hotspots, wired network cards, and 4G Internet access. For more information, see User_Guide.md.

In the examples directory, demos of some common application scenarios are implemented for users to quickly integrate into their own application projects.

  • examples/wifi_router: The ESP-IoT-Bridge device connects to the router through Wi-Fi or Ethernet. A phone or another station reaches the Internet through the device SoftAP.
  • examples/wireless_nic: The ESP-IoT-Bridge device connects to a PC or MCU through USB, Ethernet, SPI, or SDIO. The host gains a network interface and can reach the Internet after the device is provisioned.
  • examples/wired_nic: The ESP-IoT-Bridge device connects to the router LAN port with an Ethernet cable. A PC or MCU connects through USB, SPI, or SDIO and reaches the Internet.
  • examples/4g_hotspot: The ESP-IoT-Bridge device uses a mobile network module and a SIM card, then converts the cellular network into a Wi-Fi hotspot.
  • examples/4g_nic: The ESP-IoT-Bridge device uses a mobile network module and a SIM card. A PC or MCU connects through Ethernet, SPI, or SDIO and reaches the Internet.
  • examples/iperf/ethernet_wireless_nic: The ESP-IoT-Bridge device connects to a PC over Ethernet and to the network through a Wi-Fi router, then measures throughput between the PC and the router.