DDT4ALL

DDT4ALL is a cross-platform diagnostic application for CAN bus vehicle networks. It lets you create your own ECU parameter screens and communicate with ECUs through various OBD-II interfaces, including ELM327, Vlinker FS, VGate iCar Pro, OBDLink SX/EX and ELS27 adapters.

• Current version: v3.1.4 (Aetherion Phoenix)
• License: GPL-3.0-or-later

---

Warnings

• This application is work in progress. Use Expert mode only if you know what you are doing.
• In non-expert mode the tool is meant to be harmless for the vehicle (keep the Expert mode button in its released state).
• Do not use this software if you do not understand how a CAN network (or an ECU) works — serious damage is possible on a live vehicle.
• Maintenance, testing and research only; the author declines responsibility for any use. You are responsible.

---

Features

• Diagnostics: Read / Clear DTC, manual ECU requests, auto-scan ECUs, live parameter monitoring.
• Screens: Custom ECU parameter screens designer, screen recorder, data editor.
• Networks: CAN bus sniffing (with live non-blocking capture), DoIP, KWP2000.
• Database: XML + ZIP (auto ecu.zip), JSON internal conversion, graphics extraction.
• Automation: Plugin system (vehicle-specific procedures) and extensible Python CLI.
• Internationalization: gettext/polib catalogs in 15 languages, real-time switch, HTML-aware strings.

---

Supported devices

Device	Available speeds	Default baud	Timeout	Flow control	Category	Notes
VLinker FS	57600, 115200	38400	3 s	None	Enhanced	Most stable, best compatibility
VGate iCar Pro	115200, 230400, 500000, 1000000	115200	2 s	None	Enhanced	High-speed (up to 1 000 000 bps)
ELM327 (original)	standard	38400	5 s	None	General	Usually marked PIC18F25K80
ELM327 (clone)	standard	9600–38400	5 s	None	Budget	Try different baud settings
ELM327 USB	standard	38400	5 s	None	USB	Dedicated ELM327 USB (STD_USB)
OBDLink SX	500k / 1M / 2M	115200	2 s	RTS/CTS	Professional	Highest-speed adapter
OBDLink EX	500k / 1M / 2M	115200	2 s	RTS/CTS	Professional	Tested and confirmed
ELS27	standard	38400	4 s	None	Alternative	Good ELM327 equivalent
ELS27 V5	standard	38400	4 s	None	Enhanced	CAN pins 12-13, PyRen / Renolink compatible
DERLEK USB-DIAG2/3	standard	38400	4 s	None	Professional	Auto pin swap, STN/STPX support *
USB CAN	varies	38400	5 s	None	Special	Automatic detection / fallback

* DERLEK USB-DIAG2/3 status: not checked on real hardware yet.

Connection methods

• USB — recommended for diagnostics (serial-over-USB on a COM/LPT port).
• Bluetooth — convenient, occasional dropouts possible.
• WiFi — TCP/IP, IP:PORT format (e.g. 192.168.0.10:35000).

Most adapters appear as a standard serial port. Dedicated USB-CAN / USB-ELM327 devices are handled natively with an automatic fallback.

---

Language support

gettext catalogs are authored under locales/ and compiled into src/ddt4all/generated/locales/. English is the source language (used as msgid); the following catalogues are shipped:

Code	Language
fr	Français
pt	Português
de	Deutsch
es	Español
it	Italiano
ru	Русский
pl	Polski
nl	Nederlands
hu	Magyar
ro	Română
sr	Српски
tr	Türkçe
cs_CZ	Czech
uk_UA	Українська
zh_CN	简体中文

All catalogs are complete (content of all msgstr fields is present and no #, fuzzy remains), keep valid gettext syntax and preserve the original %s / named placeholders.

---

Requirements

• Python >=3.8 (3.10 or newer recommended)
• PyQt5 >=5.15, <5.16 — GUI framework
• PyQtWebEngine >=5.15, <5.16 — optional, full HTML documentation view
• pyserial ==3.5 — serial port communication
• pyusb ==1.2.1 — USB access
• crcmod ==1.7 — checksums
• polib, platformdirs
• pywin32 >=227 — Windows (serial)

Installation

Modern (recommended)

git clone https://github.com/cedricp/ddt4all.git
cd ddt4all
python -m venv ./venv

# activate virtual environment
#   Windows:
.\venv\Scripts\activate.bat
#   Linux / macOS:
source ./venv/bin/activate

# install the package (editable for development)
pip install -e .

# launch application
ddt4all
# or
python -m ddt4all

With optional features

pip install -e ".[dev]"                    # pytest, linting
pip install -e ".[can]"                    # python-can, obd
pip install -e ".[network]"                # requests, websockets
pip install -e ".[bluetooth]"              # pybluez / bleak
# all together:
pip install -e ".[dev,can,network,bluetooth]"

Legacy (manual dependencies)

pip install "PyQt5>=5.15,<5.16" "PyQtWebEngine>=5.15,<5.16" pyserial==3.5 pyusb==1.2.1 crcmod==1.7 polib platformdirs

---

Platform notes

• Linux — add the current user to the dialout group to access serial ports:

  sudo usermod -a -G dialout $USER
  # logout and login again
  

• Windows — ensure the serial/USB drivers are installed and that a COM port is assigned to the adapter. Run with administrator rights if port access fails.
• macOS — if an editable-install error is raised by pip install -e ., update the packaging tools first:

  python3 -m pip install --upgrade pip setuptools wheel
  python3 -m pip install -e .
  

  If the package data is missing at runtime (resources/projects.json not found), reinstall from the repository root:

  python3 -m pip install --force-reinstall -e .
  

Quick start

# after a successful install
ddt4all
#   or, from source (development mode):
python -m ddt4all

Use the built-in connection test to let DDT4ALL auto-detect the adapter and the correct baud rate. On discovery, the optimal device configuration is applied.

Shortcut / alias (optional)

# Linux / macOS
alias ddt4all-dev='cd /path/to/ddt4all && source ./venv/bin/activate && python -m ddt4all'
# Windows (PowerShell)
Set-Alias -Name ddt4all -Value "ddt4all"

Plugin system

Vehicle-specific procedures are provided as Python modules under src/ddt4all/plugins/:

• ab90_reset.py — AB90 air-bag reset
• card_programming.py — ECU card programming
• clio3_eps_reset.py, clio4_eps_reset.py — Clio 3/4 EPS reset
• cmd_macros.py — DDT2000 command macros (.cmd, uses cmd_macros_lib/)
• laguna2_uch_reset.py, laguna3_uch_reset.py — Laguna 2/3 UCH
• megane2_uch_reset.py, megane3_uch_reset.py — Megane 2/3 UCH
• megane3_ab_reset.py — Megane 3 air-bag reset
• megane3_eps_reset.py — Megane 3 EPS
• rsat4_reset.py — RSAT4 system reset
• vin_crc.py — VIN CRC calculation
• zoe_waterpump_counter_reset.py — ZOE water-pump counting reset

The plugin architecture allows custom procedures for other ECUs and brands.

---

Architecture

Core modules

• src/ddt4all/main.py — entry point (PyQt GUI + connection handling)
• src/ddt4all/version.py — version / codename / contributors
• src/ddt4all/options.py — configuration & device settings persistence
• src/ddt4all/file_manager.py — file and directory utilities
• src/ddt4all/cli/ — command-line interface handlers (DoIP, parameters, USB device)

Communication

• core/elm/ — ELM327 / adapter communication (elm.py, device_manager.py, port.py, constants.py)
• core/ecu/ — ECU database, files and scanning (ecu_database.py, ecu_scanner.py, ecu_device.py, ecu_file.py, ecu_request.py, ecu_ident.py, data_item.py, utils.py)
• core/doip/ — DoIP (Diagnostics over IP) protocol support
• core/parameters/helpers.py — parameter parsing / helpers
• core/usbdevice/ — USB CAN devices (obd_device.py, usb_can.py, constants.py)

Modern UI

• ui/ — main window, widgets, dialogs
• ui/displaymod/ — display widgets / graphical elements
• ui/data_editor/ — ECU qualitative data editing
• ui/sniffer/ — CAN sniffing with a QThread-based thread

Data & resources

• generated/ — compiled resources and .mo translation catalogs
• resources.qrc — Qt resource descriptor
• vehicles/ — vehicle-specific files
• json/ — JSON database folder
• logs/ — runtime logs (see also the platform user-log directory)

Threading

• QThread for the network sniffer (non-blocking capture)
• threading.Lock() in the ELM layer for safe serial operations
• QTimer for periodic refresh and connection monitoring

---

Testing

pip install -e ".[dev]"
pytest

Test suites are in tests/ (unit, integration, smoke). A GitHub Actions workflow (python-app.yml) runs the test suite on multiple OSes.

Distribution / build

• Windows: InnoSetup installer under setup_tools/inno-win-setup/ (wininstaller.iss, version.h, win32_deps/).
• macOS: DMG build via setup_tools/mac-os/builddmg.sh (with main.spec, entitlements.plist).
• Linux: AppImage build scripts / workflow (see setup_tools/).

Prebuilt installers are published on the Releases page.

---

Troubleshooting

Connection

• No serial port listed — check driver installation. On Linux, verify the user is in the dialout group. On Windows, try running as administrator.
• Adapter not detected — test every available COM/USB port with the connection test; try another baud rate (38400, 9600, 115200).
• ELS27 V5 special case — check the driver (PyRen / Reolink), then select the proper serial port manually (device may appear as FTDI, CH340 or CP210x).
• WiFi — format IP:PORT, same local network, firewall open.

Installation

• PyQtWebEngine missing — DDT4All still works; only the full web-based documentation view is limited (graceful fallback).
• Windows serial fails — reinstall pywin32 and run python -m pywin32_postinstall -install, ideally with admin rights.

Documentation & videos

See the project Wiki (Android port, device notes) and the YouTube channel (CAN sniffing, AirBag DTC, Megane examples).

Community

• Discord: Join the community
• Issues: GitHub Issues
• Discussions: GitHub Discussions

Contributing

• Report bugs — add a screenshot, your Logs/ file, [Bug] in the title, OS + Python + adapter info.
• Suggestions / ideas — open a discussion with [Suggestion] in the title.
• Translations — improve or add language catalogs under locales/.
• Donations — financial (PayPal / GitHub Sponsors) and hardware donations (OBD-II interfaces, ECU devices) are welcome to extend device support.

License & disclaimer

This project is free software under the GPL-3.0-or-later license. DDT4ALL is an independent, unofficial, educational tool and is not affiliated with any vehicle/software brand. It is provided for study, testing and research only; it is not a replacement for factory/bench diagnostic tools. Use on a real vehicle is at your own risk — see the warnings at the top of this file.

Happy CAN studying! 🚗🔧