ahmedfgad/NumPyCNN

ahmedfgad/NumPyCNN has 600 GitHub stars and 186 forks. Star changes are not measured yet. Last checked 2026-11-11 18:07 UTC. Last push 2026-10-17.

How these counts are measured

Building Convolutional Neural Networks From Scratch using NumPy

600 stars 186 forks

Measured star growth

in 24h: Update delayed
in 7 days: Update delayed
in 15 days: Update delayed
in 1 month: Update delayed

Net star changes over overlapping periods, not daily totals. Missing measurements are left blank. Stars measure attention, not software quality.

README.md

Original

NumPyCNN: Implementing Convolutional Neural Networks From Scratch

NumPyCNN is a Python implementation for convolutional neural networks (CNNs) from scratch using NumPy.

IMPORTANT If you are coming for the code of the tutorial titled Building Convolutional Neural Network using NumPy from Scratch, then it has been moved to the TutorialProject directory on 20 May 2020.

The project has a single module named cnn.py which implements all classes and functions needed to build the CNN.

It is very important to note that the project only implements the forward pass of training CNNs and there is no learning algorithm used. Just the learning rate is used to make some changes to the weights after each epoch which is better than leaving the weights unchanged.

The project can be used for classification problems where only 1 class per sample is allowed.

The project will be extended to train CNN using the genetic algorithm with the help of a library named PyGAD. Check the library's documentation at Read The Docs: https://pygad.readthedocs.io

Donation

Credit/Debit Card: https://donate.stripe.com/eVa5kO866elKgM0144
Open Collective: opencollective.com/pygad
PayPal: Use either this link: paypal.me/ahmedfgad or the e-mail address [email protected]
Interac e-Transfer: Use e-mail address [email protected]

Installation

To install PyGAD, simply use pip to download and install the library from PyPI (Python Package Index). The library is at PyPI at this page https://pypi.org/project/pygad.

Install PyGAD with the following command:

pip install pygad

To get started with PyGAD, please read the documentation at Read The Docs https://pygad.readthedocs.io.

PyGAD Source Code

The source code of the PyGAD' modules is found in the following GitHub projects:

The documentation of PyGAD is available at Read The Docs https://pygad.readthedocs.io.

PyGAD Documentation

The documentation of the PyGAD library is available at Read The Docs at this link: https://pygad.readthedocs.io. It discusses the modules supported by PyGAD, all its classes, methods, attribute, and functions. For each module, a number of examples are given.

If there is an issue using PyGAD, feel free to post at issue in this GitHub repository https://github.com/ahmedfgad/GeneticAlgorithmPython or by sending an e-mail to [email protected].

If you built a project that uses PyGAD, then please drop an e-mail to [email protected] with the following information so that your project is included in the documentation.

Project title
Brief description
Preferably, a link that directs the readers to your project

Please check the Contact Us section for more contact details.

Life Cycle of PyGAD

The next figure lists the different stages in the lifecycle of an instance of the pygad.GA class. Note that PyGAD stops when either all generations are completed or when the function passed to the on_generation parameter returns the string stop.

PyGAD Lifecycle

The next code implements all the callback functions to trace the execution of the genetic algorithm. Each callback function prints its name.

import pygad
import numpy

function_inputs = [4,-2,3.5,5,-11,-4.7]
desired_output = 44

def fitness_func(ga_instance, solution, solution_idx):
    output = numpy.sum(solution*function_inputs)
    fitness = 1.0 / (numpy.abs(output - desired_output) + 0.000001)
    return fitness

fitness_function = fitness_func

def on_start(ga_instance):
    print("on_start()")

def on_fitness(ga_instance, population_fitness):
    print("on_fitness()")

def on_parents(ga_instance, selected_parents):
    print("on_parents()")

def on_crossover(ga_instance, offspring_crossover):
    print("on_crossover()")

def on_mutation(ga_instance, offspring_mutation):
    print("on_mutation()")

def on_generation(ga_instance):
    print("on_generation()")

def on_stop(ga_instance, last_population_fitness):
    print("on_stop()")

ga_instance = pygad.GA(num_generations=3,
                       num_parents_mating=5,
                       fitness_func=fitness_function,
                       sol_per_pop=10,
                       num_genes=len(function_inputs),
                       on_start=on_start,
                       on_fitness=on_fitness,
                       on_parents=on_parents,
                       on_crossover=on_crossover,
                       on_mutation=on_mutation,
                       on_generation=on_generation,
                       on_stop=on_stop)

ga_instance.run()

Based on the used 3 generations as assigned to the num_generations argument, here is the output.

on_start()

on_fitness()
on_parents()
on_crossover()
on_mutation()
on_generation()

on_fitness()
on_parents()
on_crossover()
on_mutation()
on_generation()

on_fitness()
on_parents()
on_crossover()
on_mutation()
on_generation()

on_stop()

Example

Check the PyGAD's documentation for information about the implementation of this example.

import numpy
import pygad.cnn

train_inputs = numpy.load("dataset_inputs.npy")
train_outputs = numpy.load("dataset_outputs.npy")

sample_shape = train_inputs.shape[1:]
num_classes = 4

input_layer = pygad.cnn.Input2D(input_shape=sample_shape)
conv_layer1 = pygad.cnn.Conv2D(num_filters=2,
                               kernel_size=3,
                               previous_layer=input_layer,
                               activation_function=None)
relu_layer1 = pygad.cnn.Sigmoid(previous_layer=conv_layer1)
average_pooling_layer = pygad.cnn.AveragePooling2D(pool_size=2, 
                                                   previous_layer=relu_layer1,
                                                   stride=2)

conv_layer2 = pygad.cnn.Conv2D(num_filters=3,
                               kernel_size=3,
                               previous_layer=average_pooling_layer,
                               activation_function=None)
relu_layer2 = pygad.cnn.ReLU(previous_layer=conv_layer2)
max_pooling_layer = pygad.cnn.MaxPooling2D(pool_size=2, 
                                           previous_layer=relu_layer2,
                                           stride=2)

conv_layer3 = pygad.cnn.Conv2D(num_filters=1,
                               kernel_size=3,
                               previous_layer=max_pooling_layer,
                               activation_function=None)
relu_layer3 = pygad.cnn.ReLU(previous_layer=conv_layer3)
pooling_layer = pygad.cnn.AveragePooling2D(pool_size=2, 
                                           previous_layer=relu_layer3,
                                           stride=2)

flatten_layer = pygad.cnn.Flatten(previous_layer=pooling_layer)
dense_layer1 = pygad.cnn.Dense(num_neurons=100, 
                               previous_layer=flatten_layer,
                               activation_function="relu")
dense_layer2 = pygad.cnn.Dense(num_neurons=num_classes, 
                               previous_layer=dense_layer1,
                               activation_function="softmax")

model = pygad.cnn.Model(last_layer=dense_layer2,
                        epochs=1,
                        learning_rate=0.01)

model.summary()

model.train(train_inputs=train_inputs, 
            train_outputs=train_outputs)

predictions = model.predict(data_inputs=train_inputs)
print(predictions)

num_wrong = numpy.where(predictions != train_outputs)[0]
num_correct = train_outputs.size - num_wrong.size
accuracy = 100 * (num_correct/train_outputs.size)
print("Number of correct classifications : {num_correct}.".format(num_correct=num_correct))
print("Number of wrong classifications : {num_wrong}.".format(num_wrong=num_wrong.size))
print("Classification accuracy : {accuracy}.".format(accuracy=accuracy))

For More Information

There are different resources that can be used to get started with the building CNN and its Python implementation.

Tutorial: Implementing Genetic Algorithm in Python

To start with coding the genetic algorithm, you can check the tutorial titled Genetic Algorithm Implementation in Python available at these links:

This tutorial is prepared based on a previous version of the project but it still a good resource to start with coding the genetic algorithm.

Tutorial: Introduction to Genetic Algorithm

Get started with the genetic algorithm by reading the tutorial titled Introduction to Optimization with Genetic Algorithm which is available at these links:

Tutorial: Build Neural Networks in Python

Read about building neural networks in Python through the tutorial titled Artificial Neural Network Implementation using NumPy and Classification of the Fruits360 Image Dataset available at these links:

Tutorial: Optimize Neural Networks with Genetic Algorithm

Read about training neural networks using the genetic algorithm through the tutorial titled Artificial Neural Networks Optimization using Genetic Algorithm with Python available at these links:

Tutorial: Building CNN in Python

To start with coding the genetic algorithm, you can check the tutorial titled Building Convolutional Neural Network using NumPy from Scratch available at these links:

This tutorial) is prepared based on a previous version of the project but it still a good resource to start with coding CNNs.

Tutorial: Derivation of CNN from FCNN

Get started with the genetic algorithm by reading the tutorial titled Derivation of Convolutional Neural Network from Fully Connected Network Step-By-Step which is available at these links:

Book: Practical Computer Vision Applications Using Deep Learning with CNNs

You can also check my book cited as Ahmed Fawzy Gad 'Practical Computer Vision Applications Using Deep Learning with CNNs'. Dec. 2018, Apress, 978-1-4842-4167-7 which discusses neural networks, convolutional neural networks, deep learning, genetic algorithm, and more.

Find the book at these links:

Fig04

Citing PyGAD - Bibtex Formatted Citation

If you used PyGAD, please consider adding a citation to the following paper about PyGAD:

@misc{gad2021pygad,
      title={PyGAD: An Intuitive Genetic Algorithm Python Library}, 
      author={Ahmed Fawzy Gad},
      year={2021},
      eprint={2106.06158},
      archivePrefix={arXiv},
      primaryClass={cs.NE}
}

Contact Us

Explore related projects

Asabeneh/30-Days-Of-Python

The 30 Days of Python programming challenge is a step-by-step guide to learn the Python programming language in 30 days. This challenge may take more than 100 days. Follow your own pace. These videos may help too: https://www.youtube.com/channel/UC7PNRuno1rzYPb1xLa4yktw

78,618 stars