Skip to content
Projects

TrafeX/home-assistant-config

View on GitHub

TrafeX/home-assistant-config has 53 GitHub stars and 4 forks. GitHot measured 0 stars in 24 hours. Last checked 2026-11-17 14:45 UTC. Last push 2026-11-15.

How these counts are measured

What you can do

  • Alarm system with push notifications (camera image, disarm and blink lights actions) via the companion app
  • Alarm verification: a door or window triggers the alarm at once, a motion sensor only when a second sensor fires within 5 minutes
  • Alarm history: logbook, state history and archived camera snapshots of every alarm event
  • Warn about open doors and offline sensors or cameras when arming, and when they go offline while armed

Measured star growth

in 24h
0
in 7 days
Collecting history
in 15 days
Collecting history
in 1 month
Collecting history

Net star changes over overlapping periods, not daily totals. Missing measurements are left blank. Stars measure attention, not software quality.

About

My Home Assistant configuration

Developer Tools

README.md

Original

Home Assistant configuration

Features

Some of the things I've implemented:

  • Alarm system with push notifications (camera image, disarm and blink lights actions) via the companion app
  • Alarm verification: a door or window triggers the alarm at once, a motion sensor only when a second sensor fires within 5 minutes
  • Alarm history: logbook, state history and archived camera snapshots of every alarm event
  • Warn about open doors and offline sensors or cameras when arming, and when they go offline while armed
  • Have home modes to control lighting and heating based on the alarm state
  • Fully automated living lights
  • Automated hallway lights which dim at night
  • Notify when washing machine or wash dryer is finished, including the duration and energy usage
  • Play speech messages via the Google Mini's
  • Presence detection with home coming and leaving automation
  • Night mode; turn the ground floor lights off and dim the hallway lights
  • Integration with ZwaveJS
  • Modules with ESPHome communicating via MQTT
  • Enable ventilation when CO2 level reaches a certain level
  • Enable ventilation when the shower is used
  • Automated Christmas lights (only during the holidays 😉)
  • Notify when one of the smoke sensors detects smoke
  • Ghost mode; turn on lights for a short period when away to pretend someone is home
  • Start the vacuum cleaner based on a schedule with the option to override per day
  • Notify when the vacuum cleaner is done
  • Dim the lights when the TV is turned on
  • Turn the heating down when night mode is activated or leaving home
  • Notify when you leave the frontdoor open
  • Make my vacuum cleaner come from under the couch to be able to empty it
  • Have a 'guest presence' option to override the presence detection
  • Send a snapshot of the person ringing the doorbell and announce it on the Google Nest Hubs
  • DSMR integration, monitoring my energy and gas usage
  • Brighten the backyard lights when motion is detected
  • Notify when the powerline voltage fluctuates too much
  • Cast a dashboard view of Home Assistant to Google Nest Hub
  • Notify when the external IP changes
  • Shutdown NAS when the UPS is running on battery for too long
  • Notify when one the battery powered sensors is running low on battery
  • Notify when it's time to water the plants and turn on the irrigation system
  • A dashboard with graphs of all temperature, humidity and energy usage sensors
  • An energy dashboard with the solar production, grid usage and house consumption
  • Turn off the heating in the office when the workday is over
  • Blink the kids bedroom lights when it's time to get up or go to sleep
  • Start the washing machine or dryer automatically when there is enough solar power available
  • Ask if the airconditioner should be turned on when the temperature is above a certain level
  • Heat Tygo's bedroom with the airconditioner on surplus solar power
  • Warn when the temperature or humidity in any room goes beyond a certain threshold
  • Warn when one of the devices reports an error or malfunction

Home Assistant dashboard

Hardware

The following hardware is integrated in this system.

Quantity Type Brand Protocol
1 Controller Aeon Labs z-stick gen5+ zwave
1 Controller Sonoff Zigbee USB Dongle Plus zigbee
5 Dimmer Fibaro dimmer 500w (FGD-211) zwave
3 Dimmer Fibaro dimmer 2 250watt (FGD-212) zwave
1 Wallplug Aeon Labs Inline Smart Energy zwave
2 Wallplug Greenwave Powernode-1 zwave
1 Wallplug TBK Home zwave
3 Smoke sensor Fibaro Smoke sensor (FGSS001) zwave
1 CO sensor Fibaro CO sensor (FGCD001) zwave
1 Insertmodule Fibaro insertmodule 2x1,5kw (FGS-222) zwave
5 Multisensor Aeon Labs Multisensor 6 zwave
1 Motion sensor Neo Coolcam motion sensor zwave
2 Wallplug Qubino Smart Plug 16A zwave
1 Weather Netatmo Weatherstation wifi
2 Weather Netatmo extension module wifi
1 Thermostat Nefit Easy wifi
6 Camera Foscam, D-Link, Xiaomi wifi
1 Doorbell Reolink doorbell lan
1 Assistant Google Home Mini wifi
1 Assistant Google Nest Mini wifi
4 Assistant Google Nest Hub wifi
1 Led strip Homeylux led strip RGBWW 5 meter wifi
4 Multisensor Tuya temperature & humidity sensors wifi
2 Wallplug Shelly Plug S wifi
1 Wallplug Shelly Plus Plug wifi
3 Light Philips Hue Lily garden spots zigbee
1 Irrigation Woox R7060 Irrigation Control zigbee
4 Wallplug Third Reality Smart Plug zigbee
2 Insertmodule Shelly 2PM zwave
1 Motion sensor Aqara Motion Sensor P1 zigbee
2 Door sensor Aqara Door and Window sensor zigbee
1 Solar Inverter SolarEdge SE2200H wifi
2 Button Sonoff SNZB-01P zigbee
1 Sensor Sonoff SNZB-02P zigbee
1 Light AwoX Bulb 12253 zigbee