1technophile/OpenMQTTGateway

OpenMQTTGateway aims to unify various technologies and protocols into a single firmware. This reduces the need for multiple physical bridges and streamlines diverse technologies under the widely-used MQTT protocol.

Sponsors

Documentation

The documentation is here

New to OpenMQTTGateway? Follow the Getting Started guide to flash a board from your browser and see your first sensor data in about 15 minutes.

The reference sheet, with the list of all functions, pinouts is here

Upload

Upload OpenMQTTGateway directly from the upload page (no additional software required) or build your own configuration with PlatformIO.

Using OpenMQTTGateway ?

Support open-source development through sponsorship, it helps keep the project healthy and evolving.

Products powered by OpenMQTTGateway

Theengs Bridge, Bluetooth gateway (BLE) with external antenna

Theengs bridge is a powerfull BLE to MQTT gateway for over 100 sensors. Equipped with an Ethernet port, and external antenna, ensuring an enhanced range for your BLE sensors. It supports also WiFi connectivity.

Support the project by purchasing the Theengs bridge

Compatible items

• List of supported BLE devices, thermometers, scales, plant sensors, beacons...

• Boards guide, RF Bridge, IR, BLE gateways...

Running on a computer If you want to use the BLE decoding capabilities of OpenMQTTGateway with a Raspberry Pi, Windows or Unix PC you can now leverage Theengs Gateway.

• Parts to build your gateway, DHT, RF, IR emitters and receivers...

Compatible controllers, saas or software

• Home Assistant

• OpenHAB

• NodeRed

• AWS-IOT

Contributors ✨

Thanks goes to these wonderful people who helped OpenMQTTGateway on Github and to the users contributions into the community.

Support

For Questions or Support please don't open an issue, first go to the docs and if you don't find your answer there, you can post your question in the community forum

Help

If you like the project and/or used it please consider supporting it! It can be done in different ways:

• Helping other users in the community
• Contribute to the code or the documentation
• Donate or sponsor the project developers
• Make a video or a blog article about what you have done with OpenMQTTGateway and share it to the community

Media

• Hackaday - ARDUINO LIBRARY BRINGS RTL_433 TO THE ESP32
• CNX Software - 433 MHz is not dead! Using an ESP32 board with LoRa module to talk to 433 MHz sensors
• RTL_433 PORTED TO ESP32 MICROCONTROLLERS WITH CC1101 OR SX127X TRANSCEIVER CHIPS
• Using low-cost wireless sensors in the unlicensed bands
• SMART PLUG ESP32 OPENMQTTGATEWAY SERVING AS AN BLE MQTT GATEWAY AND A POWER METER

Theengs Plug

433Mhz and BLE

BLE

433Mhz

LORA