lvgl/lv_esp_idf
lvgl/lv_esp_idf has 1,313 GitHub stars and 480 forks. GitHot measured -1 stars in 24 hours, -3 in 7 days, and -1 in 15 days. Last checked 2026-11-21 11:01 UTC. Last push 2026-10-22.
측정된 스타 증가
- in 24h
- -1
- in 7 days
- -3
- in 15 days
- -1
- in 1 month
- 기록 수집 중
서로 겹치는 기간의 순증가량이며 일별 합계가 아닙니다. 측정값이 없으면 비워 둡니다. 스타는 관심도를 나타내며 품질을 보장하지 않습니다.
소개
LVGL ported to ESP32 including various display and touchpad drivers
창작 및 미디어README.md
OriginalLVGL under ESP-IDF demonstration project
Overview
The lv_esp_idf presents a common way of building LVGL applications on top of the ESP-IDF structure. This project is intended to serve as a references for users that just wanted to dive in the application code while they abstract the project set-up complexities.
The main application will set-up the LVGL, plus the display and touch driver(if any), then it will execute one of the selected LVGL demos such as benchmarking or music demo.
Supported Boards
As any ESP-IDF project, this one can support a variety of ESP32 families boards, the user can check the out-of-the-box supported boards by referring the folder manifests.
Getting started
There are currently two ways of using this repository, via the LVGL Project Creator, or configuring it as regular ESP-IDF project, for the later this documentation will cover the command line method, however the user can set this repo using the Espressif IDE.
Using the LVGL Project Creator
- Obtain the LVGL Project Creator.
- Launch the Project Creator
- Create an ESP IDF project
- Follow the remaining steps given by the Project Creator
- Set up ESP-IDF.
Using the regular ESP-IDF project method
First of all you need ESP-IDF.
Clone this repository on your preferred folder.
Set the IDF environment:
$ . /path/to/esp-idf/export.sh(ESP-IDF v5.x), or$ source ~/.espressif/tools/activate_idf_<version>.sh(ESP-IDF v6.x installed with the ESP-IDF Installation Manager)Go to this project root:
$ cd /path/to/this/repoBefore doing anything please remove the
idf_component.ymlfile on themainfolder, this step is valid only when not using the LVGL Project creator.If user is going to build using one standard board from espressif, add its BSP package (for example for ESP-BOX-3):
$ idf.py add-dependency esp-box-3If user is going to build using a custom board or a display wired to a development board, add the generic BSP package and set the display and its pins in
idf.py menuconfigunderComponent config → Board Support Package (generic) → Display:$ idf.py add-dependency esp_bsp_genericUpdate the components (using IDF set target is one option), the target must match the chip of the board:
$ idf.py set-target <esp32xxx>(for exampleesp32s3for the ESP-BOX-3)Wait the project to set-up.
Building and Flashing
After setting up this project using either the LVGL Project Creator or the Espressif tools, you should be able to build and flash the application following the steps:
- Set the IDF environment:
$ . /path/to/esp-idf/export.sh(ESP-IDF v5.x), or$ source ~/.espressif/tools/activate_idf_<version>.sh(ESP-IDF v6.x installed with the ESP-IDF Installation Manager) - Update the project for your target if it is not already:
$ idf.py set-target <esp32xxx> - Issue the build:
$ idf.py build - For flashing use the flash command:
$ idf.py flash - Optionally the user can select the port:
$ idf.py -p <COM or TTY port> flash - After flashing you can launch the console:
$ idf.py monitor - Optionally the user can concatenate these commands into a single one:
idf.py -p <COM or TTY port> build flash monitor
More information
The LVGL documentation page has a dedicated section for the Espressif chips integration. If the user wants to get more information about the integration details or tips and tricks about LVGL under Espressif chips visit Espressif section of LVGL documentation.
관련 프로젝트 살펴보기
불러오는 중…