OpenScan-org/OpenScan3
OpenScan-org/OpenScan3 has 193 GitHub stars and 35 forks. GitHot measured 0 stars in 24 hours and +1 in 7 days. Last checked 2026-11-20 16:21 UTC. Last push 2026-11-19.
計測したスター増加
- 24時間
- 0
- 7日間
- +1
- 15日間
- 履歴を収集中
- 1か月
- 履歴を収集中
期間ごとの純増数です。期間は重複しており、日別の値ではありません。未計測の値は空欄です。スター数は注目度の指標であり、品質の保証ではありません。
概要
Firmware for controlling OpenScan devices.
制作・メディアREADME.md
オリジナルOpenScan3
About The Project
OpenScan3 is a firmware for controlling OpenScan devices, a family of open source and open hardware devices, designed to make 3d scanning with photogrammetry accessible to everyone.
The goal of OpenScan3 is providing a hackable and extensible firmware for common OpenScan devices and a starting point for custom photogrammetry rigs.
OpenScan3 is primarily developed for the Raspberry Pi 4 with 2 GB RAM. Raspberry Pi 3 and 5 are supported where possible.
See docs/HARDWARE_COMPATIBILITY.md for the supported Raspberry Pi and camera combinations.
OpenScan3 is maintained by OpenScan.eu.
Getting Started
There are two ways to get started on a Raspberry Pi: flash a ready-made image or build a custom one.
Install OpenScan Image (Recommended)
Note: Advanced customization (hostname, user, Wi‑Fi, etc.) is confirmed to work with Raspberry Pi Imager > 2.0. Older versions may not apply the customizations properly.
- Open Raspberry Pi Imager (>=2.0.6).
- Click ADD OPTIONS -> Click EDIT Content Repository -> Use custom URL and paste
https://openscan.eu/rpi-repo.json-> Click Apply and restart - Choose your Raspberry Pi device
- Select the image according to your camera variant. IMPORTANT: Ensure the image matches your camera model. Choosing the wrong image may result in permanent hardware damage.
- Select the storage device to write the image to.
- Modify configuration options if needed (hostname, user, Wi‑Fi, etc.) via the Raspberry Pi Imager interface.
- Write the image. Eject the card and insert it into the Pi.
Default Hostname: openscan (or openscan.local if mDNS is enabled)
UI (Webfrontend): http://openscan/ or http://openscan.local/
API documentation: http://openscan/api/latest/docs.
Build OpenScan Image from Source
You can also use OpenScan3 Pi Image Builder based on pi-gen to build the image from source or customize it.
Development
See docs/DEVELOP.md for development setup, first steps, and architectural overview.
For details and up-to-date status, see GitHub issues and check out the Discord channel.
Contributing
OpenScan thrives because of its community. Whether you report a bug, suggest a feature, or submit a pull request: every contribution matters! Check out the Contributor Guide to get started and jump right in!
License
Distributed under the GPL-3.0 license. See LICENSE for more information.
Contact
Join the OpenScan Discord Server to get in touch with the OpenScan community!
Or write an email to [email protected]